T
Tanya DavisAug 23, 2025
What to do if my Panasonic Air Conditioner unit does not work?
- DDanielle PorterAug 25, 2025
If your Panasonic Air Conditioner unit isn't working, check if the circuit breaker is tripped and check if timers have been set.

What to do if my Panasonic Air Conditioner unit does not work?
If your Panasonic Air Conditioner unit isn't working, check if the circuit breaker is tripped and check if timers have been set.
Why does my Panasonic Air Conditioner make a water flowing sound during operation?
The water flowing sound you hear during the operation of your Panasonic Air Conditioner is due to refrigerant flow inside the unit.
Why does airflow continue from my Panasonic CS-XE7LKEW Air Conditioner even after operation has stopped?
The airflow that continues from your Panasonic Air Conditioner even after operation has stopped is due to the extraction of remaining heat from the indoor unit, which can take up to 30 seconds.
Why is operation delayed a few minutes after I restart my Panasonic CS-XE7LKEW Air Conditioner?
The delay in operation after restarting your Panasonic Air Conditioner is a protection mechanism for the unit’s compressor.
Why does the indoor fan stop occasionally during automatic fan speed setting on my Panasonic Air Conditioner?
The indoor fan in your Panasonic Air Conditioner stops occasionally during automatic fan speed setting to help remove surrounding odors.
Why does the indoor fan stop occasionally during heating operation on my Panasonic Air Conditioner?
The indoor fan in your Panasonic Air Conditioner stops occasionally during heating operation to avoid unintended cooling effect.
Why is the power indicator blinking before the unit is switched on in my Panasonic CS-XE7LKEW Air Conditioner?
The blinking power indicator before the unit is switched on in your Panasonic Air Conditioner is a preliminary step in preparation for operation when the ON timer has been set.
Why does my room have a peculiar odour when using Panasonic Air Conditioner?
A peculiar odour in the room when using your Panasonic Air Conditioner may be due to a damp smell emitted by the wall, carpet, furniture, or clothing.
What to do if Patrol sensor or e-ion indicator on the indoor unit is blinking on my Panasonic CS-XE7LKEW Air Conditioner?
To resolve this, stop the Patrol or e-ion operation and then restart it. If the patrol sensor or e-ion indicator continues to blink, please consult an authorized dealer.
| Type | Wall Mounted |
|---|---|
| Cooling Capacity | 2.0 kW |
| Power Supply | 220-240 V, 50 Hz |
| Weight (Outdoor Unit) | 28 kg |
| Refrigerant | R410A |
| Outdoor Unit Dimensions (W x H x D) | 780 x 540 x 285 mm |
| Noise Level (Outdoor) | 48 dB(A) |
Safety warnings and precautions for indoor and outdoor units.
Electrical safety guidelines for power connections and handling.
Turning unit on/off, setting temperature, modes, fan speed, and airflow.
Steps to verify before contacting an authorized dealer for service.
Procedure for checking error codes and identifying critical issues.












Loading...