How to improve the efficiency of HEAT/COOL mode on my Panasonic Air Conditioner?
To improve the efficiency of the HEAT/COOL mode on your Panasonic Air Conditioner, ensure the temperature is set correctly. Additionally, close all doors and windows, clean or replace the filters, and clear any obstructions at the air inlet and outlet vents.
Why is my Panasonic Air Conditioner remote control not working?
If your Panasonic Air Conditioner remote control isn't working, make sure the batteries are inserted correctly. If the display is dim or the transmission signal is weak, try replacing the batteries.
What to do if my Panasonic Air Conditioner has insufficient refrigerant?
If your Panasonic Air Conditioner has insufficient refrigerant, you should add refrigerant.
What to do if my Panasonic CS-Z35UFRAW has excessive amount of refrigerant?
If your Panasonic Air Conditioner has an excessive amount of refrigerant, evacuate the excess refrigerant.
What to do if my Panasonic Air Conditioner has a dusty condenser preventing heat radiation?
If the condenser of your Panasonic Air Conditioner is dusty and preventing heat radiation, clean the condenser.
What to do if my Panasonic CS-Z35UFRAW Air Conditioner has a clogged strainer or capillary tube?
If your Panasonic Air Conditioner has a clogged strainer or capillary tube, clear the clog.
What to do if my Panasonic CS-Z35UFRAW has high gas side pressure?
If your Panasonic Air Conditioner has high gas side pressure, release pressure or check for blockages.
What to do if my Panasonic CS-Z35UFRAW compressor is inefficient?
If your Panasonic Air Conditioner compressor is inefficient, check or replace the compressor.
What to do if my Panasonic Air Conditioner unit does not receive the signal from the remote control?
If your Panasonic Air Conditioner unit isn't receiving the signal from the remote control, ensure that the receiver is not obstructed. Certain fluorescent lights may interfere with the signal transmitter; please consult an authorised dealer.
General| Cooling Capacity | 3.5 kW |
|---|---|
| Heating Capacity | 4.0 kW |
| Refrigerant | R32 |
| Power Supply | 220-240 V, 50 Hz |
| Indoor Unit Dimensions (W x H x D) | 800 mm x 295 mm x 240 mm |
| Outdoor Unit Dimensions (W x H x D) | 800 mm x 600 mm x 300 mm |
| Energy Efficiency Class (Cooling) | A++ |
| Energy Efficiency Class (Heating) | A+ |
| Noise Level (Indoor) | 21 dB |
| Noise Level (Indoor Unit) | 21 dB |
| Noise Level (Outdoor Unit) | 50 dB |
| Type | Split System |
| Seasonal Energy Efficiency Ratio (SEER) | 6.10 |
| SEER | 6.1 |
| SCOP | 4.0 |
| EER (Energy Efficiency Ratio) | 3.50 |
| COP (Coefficient of Performance) | 4.0 |
To Next Page
