Why is my Panasonic CS-Z50VKR Air Conditioner remote control not working?
If your Panasonic Air Conditioner remote control isn't working, ensure the batteries are inserted correctly. If the display is dim or the transmission signal is weak, try replacing the batteries with new ones.
Why is the TIMER indicator always on on my Panasonic Air Conditioner?
The timer setting repeats daily once set.
Why is my Panasonic Air Conditioner making a louder noise at the outdoor unit during early operation of i AUTO-X?
The compressor and fan rotate at a higher speed to boost cooling performance during initial operation.
Why does the POWER indicator blink on my Panasonic Air Conditioner before it's switched on?
The blinking POWER indicator is a preliminary step in preparation for operation when the ON timer has been set. When the ON Timer is set, the unit may start earlier (up to 35 minutes) before the actual set time in order to achieve the desired temperature on time.
Why does airflow continue after I stop my Panasonic CS-Z50VKR Air Conditioner?
The airflow continues even after operation has stopped because the unit is extracting remaining heat from the indoor unit, which can take up to 30 seconds.
Why is my Panasonic CS-Z50VKR Air Conditioner making a cracking sound during operation?
The cracking sound during operation is caused by changes in temperature, leading to the expansion or contraction of the unit.
Why does my Panasonic CS-Z50VKR Air Conditioner make a water flowing sound during operation?
The water flowing sound you hear during operation is due to the refrigerant flow inside the unit.
Why is there a delay after restarting my Panasonic Air Conditioner?
The delay is a protection mechanism for the unit’s compressor.
Why does mist emerge from my Panasonic CS-Z50VKR Air Conditioner indoor unit?
The mist emerging from the indoor unit is a condensation effect due to the cooling process.
Why does the room have a peculiar odour when using my Panasonic Air Conditioner?
This may be due to a damp smell emitted by the wall, carpet, furniture, or clothing.
Explains safety symbols and general precautions for units and power.
Specific safety measures for indoor/outdoor units, remote, power, and nanoe-G.
Specific precautions for R32 refrigerant, including installation.
Guidelines for secure installation, piping, and space requirements.
Safety rules and qualifications for service technicians.
Covers refrigerant checks, fire safety, ignition sources, ventilation, and electrical components.
Precautions for repairs, cabling, and detecting flammable refrigerant leaks.
Detailed steps for safe refrigerant removal, evacuation, and charging.
General| Type | Wall Mounted |
|---|---|
| Cooling Capacity | 5.0 kW |
| Heating Capacity | 6.0 kW |
| Refrigerant | R32 |
| Power Supply | 220-240V, 50Hz |
| Indoor Unit Noise Level (Low) | 25 dB(A) |
| Seasonal Energy Efficiency Ratio (SEER) | 6.10 |
To Next Page
