To Next PageTo Next PageWhat to do if the Panasonic CS-Z28RKR remote control does not work?
If your Panasonic Air Conditioner remote control isn't working, first, ensure the batteries are inserted correctly. If the display is dim or the transmission signal is weak, replace the batteries.
What to do if my Panasonic Air Conditioner unit does not work?
If your Panasonic Air Conditioner unit isn't working, check if the circuit breaker has tripped. Also, verify if any timers have been set.
How to clean dust around my Panasonic CS-Z28RKR?
If dust has collected around the front panel, grilles, and wall surrounding your Panasonic Air Conditioner after extended use, remove the dust regularly with a clean dampened cloth. This dust accumulation is due to the air purification effect of negative ions.
How to improve HEAT/COOL mode efficiency in Panasonic CS-Z28RKR Air Conditioner?
To improve the efficiency of the HEAT/COOL mode on your Panasonic Air Conditioner, make sure to set the temperature correctly. Also, close all doors and windows, clean or replace the filters, and clear any obstructions at the air inlet and air outlet vents.
What to do if Panasonic Air Conditioner doesn't receive signal from remote control?
Make sure the receiver is not obstructed. Certain fluorescent lights may interfere with signal transmitter. Please consult authorised dealer.
Why does my Panasonic Air Conditioner's outdoor unit emit water or steam?
The emission of water or steam from the outdoor unit is due to condensation or evaporation occurring on the pipes.
Why is the POWER indicator blinking on my Panasonic Air Conditioner?
The unit is in defrost mode (and AIR SWING is set to AUTO).
Why is the TIMER indicator always on on my Panasonic CS-Z28RKR Air Conditioner?
The timer setting repeats daily once set.
Why does the POWER indicator blink before turning on my Panasonic CS-Z28RKR?
This is a preliminary step in preparation for the operation when the ON timer has been set.
Why is my Panasonic CS-Z28RKR Air Conditioner louder during i AUTO-X operation?
The compressor and fan rotate at a higher speed to boost cooling performance during initial operation.
General| Cooling Capacity | 2.8 kW |
|---|---|
| Heating Capacity | 3.6 kW |
| Refrigerant | R32 |
| Power Supply | 220-240V, 50Hz |
| Outdoor Unit Dimensions (W x H x D) | 780 x 542 x 289 mm |
| Weight (Indoor Unit) | 9 kg |
| Energy Efficiency Class Cooling | A++ |
| Energy Efficiency Class Heating | A+ |
| Type | Split System |
| Outdoor Unit Weight (Alternative) | 28 kg |
| Coefficient of Performance (COP) | 3.80 |
| Noise Level (Indoor Unit) | 20 dB |
Guide to selecting mode, starting/stopping, and setting temperature.
Safety instructions for operating and installing indoor and outdoor units.
Precautions for safe use and handling of the remote control.
Safety guidelines for the power cord, plug, and electrical connections.
Guide to reaching temperature quickly using AUTO-X mode.
Instructions for setting ON and OFF timers for the air conditioner.
Troubleshooting steps for common issues like inefficient operation or noisy unit.
Conditions requiring professional service, such as abnormal noise or water leaks.
Procedure to retrieve error codes using the remote control.
