What to do if my Panasonic CS-Z25TKR Air Conditioner unit does not work?
If your Panasonic Air Conditioner isn't working, first check if the circuit breaker has tripped. Also, verify that no timers have been set, as this could prevent the unit from turning on.
What to do if the Panasonic CS-Z25TKR remote control does not work?
If the remote control for your Panasonic Air Conditioner isn't working, first, ensure the batteries are inserted correctly. If the display is dim or the signal is weak, try replacing the batteries with new ones.
How to improve the efficiency of HEAT/COOL mode on my Panasonic CS-Z25TKR Air Conditioner?
If your Panasonic Air Conditioner isn't heating or cooling efficiently, ensure the temperature is set correctly. Also, close all doors and windows to prevent air leakage. Clean or replace the filters, and clear any obstructions at the air inlet and outlet vents.
Why is my Panasonic Air Conditioner not receiving the signal from the remote control?
If your Panasonic Air Conditioner unit isn't responding to the remote control, make sure the receiver on the unit isn't obstructed. Also, be aware that certain fluorescent lights may interfere with the signal transmission.
How to fix a noisy Panasonic Air Conditioner?
If your Panasonic Air Conditioner is noisy during operation, check whether the unit has been installed on an incline. Also, make sure the front panel is closed properly.
General| Type | Split System |
|---|---|
| Cooling Capacity | 2.5 kW |
| Heating Capacity | 3.2 kW |
| Power Supply | 220-240 V, 50 Hz |
| Refrigerant | R32 |
| Annual Energy Consumption (Cooling) | 350 kWh |
| Outdoor Unit Dimensions (W x H x D) | 780 x 540 x 289 mm |
| Noise Level (Indoor Unit) | 19 dB |
| Noise Level (Outdoor Unit) | 46 dB(A) |
To Next Page
