To Next PageTo Next PageWhy is my Panasonic CS-Z25ZKEW remote control not working?
If the remote control for your Panasonic Air Conditioner is not working, ensure the batteries are inserted correctly and replace weak batteries.
What to do if my Panasonic CS-Z25ZKEW Air Conditioner doesn't receive the remote control signal?
If the Panasonic Air Conditioner unit does not receive the signal from the remote control, ensure that the receiver is not obstructed. Note that certain fluorescent lights may interfere with the signal transmitter; consult an authorised dealer.
How to improve the efficiency of HEAT/COOL mode on my Panasonic Air Conditioner?
If your Panasonic Air Conditioner isn't operating efficiently in HEAT/COOL mode, make sure you've set the temperature correctly. Close all doors and windows, clean or replace the filters, and clear any obstructions at the air inlet and outlet vents.
General| Cooling Capacity | 2.5 kW |
|---|---|
| Heating Capacity | 3.2 kW |
| Refrigerant | R32 |
| Outdoor Unit Noise Level | 46 dB(A) |
| Dimensions (Outdoor Unit) | 780 x 542 x 289 mm |
| Energy Efficiency Cooling | A++ |
| Energy Efficiency Heating | A+ |
| Power Supply | 220-240V, 50Hz |
| Type | Wall Mounted |
| Indoor Unit Noise Level | 19 dB(A) |
| SCOP | 4.6 |
Step-by-step instructions for powering the remote control.
Guide on how to set the correct time on the remote.
Instructions on initiating and terminating unit operation.
How to choose between AUTO, HEAT, COOL, and DRY modes.
Method for setting the desired room temperature.
Precautions related to power cords, outlets, earthing, and electrical safety.
Essential precautions for working with the R32 flammable refrigerant.
Procedures for inspecting refrigerating circuits and electrical components.
Requirements for service personnel and safe work procedures.
Ensuring a safe working environment and necessary checks.
Step-by-step guide for safely removing and evacuating refrigerant.
Guidelines for proper and safe refrigerant charging.
Recommended methods and considerations for safe refrigerant recovery.
Explanation of the nanoe X feature for air purification and its operation.
A table listing typical issues and their probable causes.
Guide on how to access and understand diagnostic error codes displayed by the unit.
