To Next PageTo Next PageWhat to do if my Panasonic CS-Z25UD3EAW Air Conditioner unit does not work?
If your Panasonic Air Conditioner unit isn't working, first check if the circuit breaker has tripped. Also, verify if any timers have been set that might be preventing the unit from turning on.
How to improve the efficiency of HEAT/COOL mode on my Panasonic CS-Z25UD3EAW Air Conditioner?
To improve the efficiency of the HEAT/COOL mode on your Panasonic Air Conditioner: ensure the temperature is set correctly, close all doors and windows, and clear any obstructions from the air inlet and outlet vents.
What to do if the power cord of my Panasonic CS-Z25UD3EAW becomes unnaturally warm?
If the power cord of your Panasonic Air Conditioner becomes unnaturally warm, turn off the power supply, unplug the unit, and consult an authorized dealer.
What to do if the switches or buttons on my Panasonic CS-Z25UD3EAW are not functioning properly?
If the switches or buttons on your Panasonic Air Conditioner are not functioning properly, turn off the power supply, unplug the unit, and consult an authorized dealer.
General| Type | Split System |
|---|---|
| Cooling Capacity | 2.5 kW |
| Heating Capacity | 3.2 kW |
| Power Supply | 220-240 V, 50 Hz |
| Outdoor Unit Dimensions (W x H x D) | 780 x 542 x 289 mm |
| Energy Efficiency Class (Cooling) | A++ |
| Energy Efficiency Class (Heating) | A+ |
| Refrigerant | R32 |
| Noise Level (Indoor) | 19 dB(A) |
| Noise Level (Outdoor) | 46 dB(A) |
| Seasonal Energy Efficiency Ratio (SEER) | 7.8 |
Lists indoor and outdoor unit model numbers for various configurations.
Instructions for setting up the remote control, including clock adjustment.
How to turn the air conditioner on and off using the remote.
Guide to choosing between AUTO, HEAT, COOL, and DRY modes.
Instructions for adjusting the desired temperature setting.
Covers general warnings, cautions, prohibited, and compulsory actions.
Details safety measures for power supply cords and remote control battery handling.
Advises on safe handling and placement of indoor and outdoor units.
Specific safety precautions related to the use of R32 refrigerant.
Ensures safe installation practices and appropriate room space.
Guidelines for trained personnel and safe work procedures.
Ensures safety checks for work areas and ignition sources.
Covers safety checks for electrical components and devices.
Covers safety during repairs, cabling, and leak detection.
Outlines safe practices for refrigerant removal and evacuation.
Details safe practices for refrigerant charging and decommissioning.
Ensures safe refrigerant recovery, cylinder handling, and equipment labeling.
Explains the remote control display, POWERFUL, and QUIET modes.
Guides on setting daily timers for automatic operation.
Guides on setting up to six weekly timer programs.
Covers checking, modifying, cancelling, and enabling/disabling timers.
Explains different operation modes (AUTO, HEAT, COOL, DRY) and their behavior.
Provides temperature ranges for energy saving and operational limits.
General precautions and rules for cleaning the unit.
Instructions for cleaning indoor unit, outdoor unit, and air filter.
Lists operational behaviors that do not indicate a fault.
Steps to perform before calling for technical assistance.
Guides on retrieving and interpreting error codes for malfunctions.
Advice for periods of inactivity and conditions requiring professional service.
Information on the collection and disposal of old electrical and electronic equipment.
