To Next PageTo Next PageWhat to do if my Panasonic CS-Z25TKEW Air Conditioner unit does not work?
If your Panasonic Air Conditioner unit isn't working, first check if the circuit breaker has tripped. Also, verify that no timers have been set.
How to improve the efficiency of HEAT/COOL mode on my Panasonic CS-Z25TKEW?
To improve the efficiency of the HEAT/COOL mode on your Panasonic Air Conditioner, ensure the temperature is set correctly. Additionally, close all doors and windows, clean or replace the filters, and clear any obstructions at the air inlet and outlet vents.
Why is my Panasonic CS-Z25TKEW remote control not working?
If your Panasonic Air Conditioner remote control isn't working, make sure the batteries are inserted correctly. If the display is dim or the transmission signal is weak, try replacing the batteries.
What to do if my Panasonic Air Conditioner unit does not receive the signal from the remote control?
If your Panasonic Air Conditioner unit isn't receiving the signal from the remote control, ensure that the receiver is not obstructed. Certain fluorescent lights may interfere with the signal transmitter; please consult an authorised dealer.
How to fix a noisy Panasonic Air Conditioner?
If your Panasonic Air Conditioner is noisy during operation, check if the unit has been installed at an incline. Also, make sure the front panel is closed properly.
What to do if my Panasonic CS-Z25TKEW has indoor high pressure protection (Heating)?
If your Panasonic Air Conditioner is experiencing indoor high pressure protection during heating, examine the indoor heat exchanger. Also, make sure the air filter isn't dirty and that there isn't a short circuit in the air circulation.
What to do if my Panasonic Air Conditioner has indoor freeze protection (Cooling)?
If your Panasonic Air Conditioner is showing signs of indoor freeze protection while in cooling mode, you should check the indoor heat exchanger. Also, ensure the air filter is clean and that there is proper air circulation without any short circuits.
What causes light sensor open or short circuit in Panasonic Air Conditioner?
If the light sensor in your Panasonic Air Conditioner has an open or short circuit, it may be due to a defective or disconnected light sensor.
General warnings for indoor and outdoor units regarding safe operation and hazards.
Safety guidelines for remote control and power supply to prevent hazards.
Specific safety measures for appliances using R32 refrigerant.
Cautions for indoor and outdoor units concerning cleaning and operation.
Common symptoms that do not signify a unit malfunction, with their causes.
How to retrieve error codes and conditions requiring authorised service.
General warnings for indoor and outdoor units regarding safe operation and hazards.
Safety guidelines for remote control and power supply to prevent hazards.
Specific safety measures for appliances using R32 refrigerant.
Cautions for indoor and outdoor units concerning cleaning and operation.
Common symptoms that do not signify a unit malfunction, with their causes.
How to retrieve error codes and conditions requiring authorised service.
General| Cooling Capacity | 2.5 kW |
|---|---|
| Heating Capacity | 3.2 kW |
| Power Supply | 220-240 V, 50 Hz |
| Refrigerant | R32 |
| Outdoor Unit Dimensions (W x H x D) | 780 x 542 x 289 mm |
| Type | Split System |
| Noise Level (Indoor) | 19 dB(A) |
