To Next PageTo Next PageWhat to do if the electric current during Panasonic CS-Z25YKEA operation is higher than specified?
If the electric current during operation is higher than the specified value, it is recommended to check the compressor and electrical connections.
What to do if the electric current during Panasonic CS-Z25YKEA operation is lower than specified?
If the electric current during operation is lower than the specified value, you should inspect the power source and compressor.
What to do if my Panasonic CS-Z25YKEA Air Conditioner has an excessive amount of refrigerant?
If your air conditioner has an excessive amount of refrigerant, reduce the amount of refrigerant.
What to do if the compressor in my Panasonic CS-Z25YKEA is inefficient?
If the compressor is inefficient, replace or repair the compressor.
General| Brand | Panasonic |
|---|---|
| Model | CS-Z25YKEA |
| Category | Air Conditioner |
| Language | English |
Details the function and layout of buttons and the display screen on the remote controller.
Guide for choosing the preferred language for the remote controller interface.
Instructions for setting the current date and time on the remote controller.
Procedure for selecting the temperature display unit (°C or °F).
Enables or disables the heat mode for the air conditioner.
Step-by-step guide for starting, stopping, and basic mode selection.
Explanation of fan speed settings, including AUTO and manual selection.
Details on controlling the vertical and horizontal air swing directions.
Specific instructions for adjusting the left and right air swing.
Activates rapid cooling or heating for quick temperature adjustment.
Reduces airflow noise for quieter operation.
Allows scheduling of operation times for specific days.
Covers LED dimming, remote lock, and reset functions.
Specifies the type of indoor unit model installed.
Enables or disables the heat mode functionality.
Configures the direction of the air swing for left and right movement.
Enables or disables the filter check reminder in Quick Menu.
Applies WLAN settings for connection with the Comfort Cloud app.
Manages rotation between multiple indoor units for balanced operation.
Enables indoor unit AUTO OFF/ON switch operations.
Performs failure diagnosis and displays error codes if issues are detected.
Enables or disables the audible feedback for button presses.
Sets the contrast level for the remote controller's LCD display.
Configures the time the screen backlight remains active.
Adjusts the brightness level of the LCD backlight.
Selects the format for displaying time (12-hour or 24-hour).
Allows manual adjustment of the current date and time.
Sets the unit for temperature display (°C or °F).
Enables or disables decimal points for temperature display.
Sets the interface language for the remote controller.
Sets a 4-digit password to protect settings.
Preset contact numbers for the installer (Contact 1 and Contact 2).
Allows selection from 15 preset custom setup configurations.
Detailed descriptions of AUTO, HEAT, COOL, and DRY modes.
Recommended temperature ranges for energy efficiency.
Explanation of how airflow direction changes based on mode and temperature.
Behavior of the unit after a power failure.
Wiping the unit with a soft cloth and professional coil/fan cleaning.
Cleaning debris around the unit and clearing the drain pipe.
Procedure for washing, rinsing, and drying air filters.
Step-by-step guide for safely removing and reinstalling the front panel.
Lists common symptoms that do not indicate malfunction and their causes.
Basic checks to perform before calling for professional servicing.
Steps to take when the remote control exhibits malfunctions.
Guidance for seasonal inspection and preparing for extended periods of non-use.
List of diagnostic display codes and their corresponding abnormalities or protection controls.
