To Next PageTo Next PageWhy does my Panasonic CS-Z50UFEAW outdoor unit emit water/steam?
If your Panasonic Air Conditioner's outdoor unit emits water or steam, it's likely due to condensation or evaporation occurring on the pipes.
Why is my Panasonic Air Conditioner remote control not working?
If the remote control for your Panasonic Air Conditioner isn't working properly, with a dim display or weak signal, try these steps: 1. Ensure the batteries are inserted correctly. 2. Replace weak batteries with new ones.
What to do if Panasonic Air Conditioner doesn't receive signal from remote control?
If your Panasonic Air Conditioner isn't receiving the signal from the remote control: * Ensure that the receiver is not obstructed. * Be aware that certain fluorescent lights may interfere with the signal transmitter.
How to improve HEAT/COOL mode efficiency on Panasonic CS-Z50UFEAW Air Conditioner?
To improve the efficiency of the HEAT/COOL mode on your Panasonic Air Conditioner: * Ensure the temperature is set correctly. * Close all doors and windows. * Clean or replace the filters. * Clear any obstructions at the air inlet and air outlet vents.
How to fix a noisy Panasonic Air Conditioner?
If your Panasonic Air Conditioner is noisy during operation: * Check if the unit has been installed at an incline. * Ensure the front panel is closed properly.
Why is the POWER indicator blinking on my Panasonic CS-Z50UFEAW during HEAT mode?
If the POWER indicator on your Panasonic Air Conditioner blinks during HEAT mode without warm air and the flap is closed, it could mean: * The unit is in defrost mode. * The system has locked to operate in HEAT mode only.
Why does dust accumulate on the wall near my Panasonic CS-Z50UFEAW?
Dust accumulation on the wall near your Panasonic Air Conditioner may be due to air circulation or static electricity generated by the air conditioner.
Why does the indoor fan stop during heating on my Panasonic Air Conditioner?
The indoor fan in your Panasonic Air Conditioner may stop occasionally during heating operation to avoid unintended cooling effect.
Why does the indoor fan stop during automatic fan speed on my Panasonic CS-Z50UFEAW?
The indoor fan of your Panasonic Air Conditioner may stop occasionally during automatic fan speed setting to help remove surrounding odors.
Why does mist emerge from my Panasonic CS-Z50UFEAW indoor unit?
The mist emerging from the indoor unit of your Panasonic Air Conditioner is a condensation effect due to the cooling process.
General| Cooling Capacity | 5.0 kW |
|---|---|
| Heating Capacity | 6.0 kW |
| Power Supply | 220-240 V, 50 Hz |
| Refrigerant | R32 |
| Type | Wall Mounted |
| Seasonal Energy Efficiency Ratio (SEER) | 6.1 |
| Noise Level (Outdoor) | 48 dB(A) |
Important warnings and cautions for safe operation and installation of the unit.
Warning about the use of flammable R32 refrigerant and associated fire risks.
Specific precautions for installing units with R32 refrigerant, including piping and tools.
Safety measures for refrigerating circuits and installation space requirements.
Requirements for service personnel and safety checks before commencing work.
Procedures for refrigerant leak detection and essential fire safety measures.
Checks for refrigeration equipment and electrical devices, including safety procedures.
Safety guidelines for repairs, cabling, and detecting flammable refrigerants.
Acceptable leak detection methods and procedures for refrigerant removal and evacuation.
Precautions for refrigerant charging and safe decommissioning of the unit.
Best practices for refrigerant recovery, evacuation, and equipment labelling.
List of common symptoms that do not indicate malfunction and their potential causes.
Essential checks to perform before contacting a service technician for operational issues.
Critical conditions requiring immediate consultation with an authorized dealer for safety.
