14
How to Use
Indicators
To adjust airfl ow direction To adjust airfl ow direction
Upper direction
Lateral direction
•
Do not adjust the fl ap by hand.
* For details operation, refer “To Learn More....”
FAN SPEED:
•
When FAN AUTO is selected, the fan speed is adjusted
automatically according to the operation mode.
•
Select the lowest fan speed to have a low noise operation.
QUIET:
•
This operation reduces airfl ow noise.
To adjust FAN SPEED and QUIET condition
•
This operation provides cleaner air, moisturises your skin
and hair, and deodorises odours in the room.
•
Press nanoe™X to activate this operation, either when the
unit is ON or OFF. During nanoe™X individual operation,
the fan speed will follow the remote control setting.
•
If nanoe™X is activated before the unit is turned off , the
nanoe™X operation will resume when the unit is turned
on. This includes when TIMER ON is set.
•
Press the button again to cancel.
Multi
•
When the unit is turn off , nanoe™X individual
operation cannot be performed or will be stopped
if other indoor unit is activating HEAT mode.
•
This operation is automatically stop after 20 minutes.
•
Press the button again to cancel.
To reach the desired temperature quickly
POWERFUL (exit setting)
To enjoy fresher and cleaner environment
•
This operation reduces air dryness during COOL mode only.
•
Press the button again to cancel.
To improve humidity and moisture level
(Not applicable for Multi split system)
(swing)
(swing)
(exit setting)
Not used
in normal
operation.
Press to restore the
remote control to
default setting.
Press to turn
the Wireless
LAN feature
ON or OFF.
To Next Page
Loading...
Need help?
General
