Panasonic CT-27D20 - Picture in Picture (PIP) Operation.6; PIP Operation with a VCR and Cable Box.6

Picture In Picture fPiP) Operation
Picture In Picture (PIP) Operation
PIP Operation with a VCR and Cable Box
This television incjudes a Picture In Picture (PIP) feature. A second video source
(VCR, Camcorder, etc.) is required to provide a second picture.
Connect your television to a VCR and Cable Box, as shown.
TERMINALS ON BACK OF TV VCR CABLE BOX
Incoming cable
CABLES NOT SUPPUED
Note: The Remote Control must be programmed with supplied codes to operate the VCR and Cable
Box. See Programming the Remote Control in the Remote Control Quick Reference Guide.
Procedure
Press the PIP button on the Remote Control to display the PIP frame.
Note: The PIP picture is the same as the main picture, initially.
To view a different picture in the PIP frame:
□ Press the TV/VIDEO button on the Remote Control to select the video PIP source.
O Verify the CABLE BOX and VCR are ON and the VCR is tuned to channel 3.
□ Choose channels for the PIP frame by pressing the CBL button on the Remote Control and
using the numeric keypad or CH up/down buttons.
□ Choose channels for the Main Picture by pressing the TV button on the Remote Control
and using the numeric keypad or CH up/down buttons.