Split Operational Buttons
SPLIT CTRL Button
SPLIT CTRL CH
Pressing I_q will enable you to use _ or or
numeric keys for changing split channel and to use TV/
VIDEO button to select desired input for split frame.
TVNIDEO Button
Press when Split frame is displayed to select desired input
mode.
Procedure
SPLIT
Press _ to display Split frame.
Note:
SPLIT CTRL
Press _ to use remote control for split
operation.
TV/VlDEO
Press O to display video input menu.
Press corresponding number key on the remote control
to select the input of your choice.
Split frame input mode can only be change while right
indicator (_ )is displayed.
Main Picture
ITV .-_COMPONENTI ._COMPONENT2
_It__VIDEOll2/314*HDMI-IN
_SPLIT Frame
Note: Model CT-30WC14 has one Component Input and
three Video inputs.
Search Button
This feature lets you scan through all available channels.
Procedure
SPLIT
Press _ to display splitframe.
SEARCH
Press _ to display search frames.
SEARCH
Press _ again to stop search feature. Split
frame channel will be the last active search frame.
SPLIT
Press _ to cancel split frame.
Main Picture --f
Note: When main picture is component or HDMI signal, Search
feature is not available.
Freeze Button
This feature is used to stop action in Split frame.
Procedure
SPLIT
Press _ to display split frame.
FREEZE
Press rqllq to stop split frame action.
FREEZE
Press rqllq again to continue action.
SPLIT
Press F_q to cancel frame.
Main Picture 1 ! F Sp,it*reeze*ramo
Main Picture Freeze Feature
This feature is used to stop action of the Main Picture and
display it on a Split freeze frame.
Procedure
FREEZE
To stop action for Main picture, press FIIq while
Split frame is not displayed.
Main Picture freeze will be displayed in Split frame.
FREEZE
Press rqllq again to cancel Main Picture freeze
frame.
Note: While Main Picture freeze frame is displayed, only
FREEZE button is active for split frame. All other Split
buttons have no effect.
Direct Video Input Selection
This feature lets you select video inputs directly using the
TV/VIDEO button and the numeric keys on the remote
control.
Procedure
TV/VlDEO
Press O on the remote control to display the
Input selection menu.
Note:
For model CT-30WC14 only.
Press corresponding number key on the remote control
to select the input of your choice.
Video input can also be selected by pressing TV/VIDEO,
then the CH A Vbuttons.
11e
To Next Page
Loading...
