Panasonic CU-2Z50TBE Service Manual

140 pages

To Next Page

Order No: PAPAMY1704060CE

Indoor Unit Outdoor Unit

CS-TZ60TKEW

CS-TZ71TKEW

CU-TZ60TKE

CU-TZ71TKE

Destination

Europe

Turkey

Please file and use this manual together with the service manual for Model No. CU-2E12SBE, CU-2E15SBE, CU-2E18SBE,

CU-3E18PBE, CU-3E23SBE, CU-4E23PBE, CU-4E27PBE, CU-5E34PBE, CU-2RE15SBE, CU-2RE18SBE, CU-3RE18SBE,

CU-2Z35TBE, CU-2Z41TBE, CU-2Z50TBE, CU-4Z68TBE, CU3Z68TBE, CU-3Z52TBE, Order No. PAPAMY1601016CE,

PAPAMY1601015CE, PAPAMY1301048CE, PAPAMY1303046CE, PAPAMY1702035CE, PAPAMY1703049CE.

WARNING

This service information is designed for experienced repair technicians only and is not designed for use by the general public.

It does not contain warnings or cautions to advise non-technical individuals of potential dangers in attempting to service a product.

Products powered by electricity should be serviced or repaired only by experienced professional technicians. Any attempt to service

or repair the products dealt with in this service information by anyone else could result in serious injury or death.

IMPORTANT SAFETY NOTICE

There are special components used in this equipment which are important for safety. These parts are marked by in the Schematic

Diagrams, Circuit Board Diagrams, Exploded Views and Replacement Parts List. It is essential that these critical parts should be replaced

with manufacturer’s specified

parts to prevent shock, fire or other hazards. Do not modify the original design without permission of

manufacturer.

PRECAUTION OF LOW TEMPERATURE

In order to avoid frostbite, be assured of no refrigerant leakage during the installation or repairing of refrigerant circuit.

CAUTION

R32 REFRIGERANT – This Air Conditioner contains and operates with refrigerant R32.

THIS PRODUCT MUST ONLY BE INSTALLED OR SERVICED BY QUALIFIED PERSONNEL.

Refer to Commonwealth, State, Territory and local legislation, regulations, codes, installation & operation manuals, before the

installation, maintenance and/or service of this product.

Other manuals for Panasonic CU-2Z50TBE

Operating Instructions116 pages

Manual22 pages

Questions and Answers:

J
Janet DavisAug 28, 2025
Why is the TIMER indicator always on in my Panasonic CU-2Z50TBE Air Conditioner?
- I
  Isabel BrownAug 29, 2025
  The TIMER indicator is always on because the timer setting repeats daily once set.
T
Thomas MullinsAug 29, 2025
Why does my Panasonic CU-2Z50TBE Air Conditioner outdoor unit emit water or steam?
- C
  Cameron BeckerAug 29, 2025
  The outdoor unit emits water or steam because condensation or evaporation occurs on the pipes.
M
moralesmichaelAug 29, 2025
How to improve HEAT/COOL efficiency in Panasonic CU-2Z50TBE?
- N
  Nicole AdamsAug 29, 2025
  If your Panasonic Air Conditioner isn't operating efficiently in HEAT/COOL mode, ensure that you set the temperature correctly, close all doors and windows, clean or replace the filters, and clear any obstructions at the air inlet and outlet vents.
K
Kyle FitzgeraldAug 29, 2025
Why is my Panasonic CU-2Z50TBE noisy?
- J
  Jennifer SmithAug 30, 2025
  If your Panasonic Air Conditioner is noisy during operation, check whether the unit has been installed at an incline. Also, make sure that the front panel is closed properly.
J
Jo MartinAug 30, 2025
Why my Panasonic CU-2Z50TBE Air Conditioner makes cracking sound?
- N
  Nicholas PorterAug 30, 2025
  A cracking sound during operation of your Panasonic Air Conditioner is due to temperature changes causing the expansion or contraction of the unit.
M
mfreemanAug 30, 2025
What to do if my Panasonic CU-2Z50TBE unit does not receive the signal from the remote control?
- C
  Clinton GonzalezAug 30, 2025
  If your Panasonic Air Conditioner unit isn't receiving the signal from the remote control, ensure that the receiver is not obstructed. Certain fluorescent lights may interfere with the signal transmitter; please consult an authorised dealer.
P
Pamela AlvarezAug 31, 2025
How to improve HEAT/COOL mode efficiency on Panasonic Air Conditioner?
- K
  Kathy RichardsonAug 31, 2025
  To improve the efficiency of the HEAT/COOL mode on your Panasonic Air Conditioner: * Ensure the temperature is set correctly. * Close all doors and windows. * Clean or replace the filters. * Clear any obstructions at the air inlet and air outlet vents.
L
Laurie HernandezAug 31, 2025
How to fix a noisy Panasonic Air Conditioner?
- S
  Stephanie RobinsonAug 31, 2025
  If your Panasonic Air Conditioner is noisy during operation: * Check if the unit has been installed at an incline. * Ensure the front panel is closed properly.
J
Joseph RuizAug 31, 2025
Why is the POWER indicator blinking on my Panasonic CU-2Z50TBE during HEAT mode?
- E
  Elizabeth MatthewsAug 31, 2025
  If the POWER indicator on your Panasonic Air Conditioner blinks during HEAT mode without warm air and the flap is closed, it could mean: * The unit is in defrost mode. * The system has locked to operate in HEAT mode only.
B
Brenda KentAug 31, 2025
Why does dust accumulate on the wall near my Panasonic CU-2Z50TBE?
- W
  Wanda RobinsonSep 1, 2025
  Dust accumulation on the wall near your Panasonic Air Conditioner may be due to air circulation or static electricity generated by the air conditioner.