What to do if Panasonic Air Conditioner unit does not receive signal from remote control?
If your Panasonic Air Conditioner unit isn't receiving the signal from the remote control, first make sure the receiver is not obstructed. Also, be aware that certain fluorescent lights may interfere with the signal.
Why is my Panasonic Air Conditioner HEAT/COOL mode not working efficiently?
If the HEAT/COOL mode on your Panasonic Air Conditioner isn't working efficiently, make sure the temperature is set correctly. Ensure all doors and windows are closed. Clean or replace the filters. Additionally, clear any obstructions at the air inlet and air outlet vents.
What to do if my Panasonic Air Conditioner unit does not receive the signal from the remote control?
If your Panasonic Air Conditioner unit isn't receiving the signal from the remote control, ensure that the receiver is not obstructed. Certain fluorescent lights may interfere with the signal transmitter; please consult an authorised dealer.
What does it mean when the POWER indicator blinks before my Panasonic Air Conditioner is switched on?
The blinking POWER indicator before the unit is switched on is a preliminary step in preparation for operation when the ON timer has been set on your Panasonic Air Conditioner.
Why my Panasonic CU-3E18PBE makes cracking sound?
A cracking sound during operation of your Panasonic Air Conditioner is due to temperature changes causing the expansion or contraction of the unit.
Why POWER indicator blinks in HEAT mode of Panasonic CU-3E18PBE Air Conditioner?
The POWER indicator blinks during HEAT mode with no warm air supply (and flap is closed) because the unit is in defrost mode (and AIR SWING is set to AUTO).
Why plastic parts of Panasonic CU-3E18PBE Air Conditioner are discolored?
Discoloration of some plastic parts in your Panasonic Air Conditioner is subject to the material types used and is accelerated when exposed to heat, sunlight, UV light, or environmental factors.
Why is my Panasonic CU-3E18PBE's operation delayed a few minutes after restarting?
The delay in operation after restarting your Panasonic Air Conditioner is a protection mechanism for the unit's compressor.
Why is the TIMER indicator always on on my Panasonic CU-3E18PBE?
The TIMER indicator is always on because the timer setting repeats daily once it has been set on your Panasonic Air Conditioner.
Why is my Panasonic CU-3E18PBE outdoor unit emitting water or steam?
The water or steam emitted from the outdoor unit of your Panasonic Air Conditioner is due to condensation or evaporation occurring on the pipes.
Warnings and cautions regarding appliance use, injury, and property damage.
Safety precautions for remote control, Network Adaptor, and power supply.
Warning about the risks associated with flammable refrigerant R32.
Requirements for personnel handling refrigerants and safety for refrigerating circuits.
Guidelines for installation space, piping protection, and compliance with regulations.
Requirements for service personnel and safety procedures before starting work.
Procedures for checking refrigerant, fire extinguishers, ignition sources, and ventilation.
Checks for refrigerating equipment, electrical components, and earth bonding.
Safety for component repair, cabling, and flammable refrigerant detection.
Acceptable leak detection methods and procedures for refrigerant removal.
Procedures for charging refrigerant and decommissioning the equipment.
Requirements for labelling and recovering refrigerant safely.
Instructions on how to retrieve and interpret error codes displayed by the unit.
Conditions requiring consultation with an authorized dealer for service.
General| Outdoor unit weight | 71000 g |
|---|---|
| Outdoor units quantity | 1 |
| Outdoor unit noise level | 47 dB |
| Outdoor unit dimensions (WxDxH) | 875 x 320 x 795 mm |
| Type | Air conditioner outdoor unit |
| Ionizer | No |
| Inverter technology | Yes |
| Refrigerating medium | R410A |
| Cooling capacity (max) | 18000 BTU/h |
| Air conditioner functions | Cooling, Heating |
| Cooling capacity in watts (max) | 7300 W |
| Cooling capacity in watts (min) | 1800 W |
| Heating capacity in watts (max) | 8300 W |
| Heating capacity in watts (min) | 1600 W |
| Cooling energy efficiency (EER, W/W) | 4.33 |
| Heating energy efficiency (COP, W/W) | 4.69 |
| Seasonal efficiency rating (cooling) (SEER) | 7 |
| Seasonal efficiency rating (heating) (SCOP) (Average heating season) | 4 |
| Noise level | 61 dB |
| Power consumption (cooling) (max) | - W |
| Power consumption (heating) (max) | 2110 W |
| Power consumption (heating) (min) | 320 W |
| Annual energy consumption (cooling) | 260 kWh |
| Annual energy consumption (heating) (Average heating season) | 1680 kWh |
To Next Page
