Panasonic CU-4KE31NBU

Need help?

Do you have a question about the Panasonic CU-4KE31NBU and is the answer not in the manual?

Summary

Safety Precautions

When Wiring

Electrical shock hazards during wiring. Follow codes, ensure secure connections.

Applicable Indoor Units

1. Operating Range

2. Specifications

2-1. Unit Specifications

Technical data and specifications for outdoor units and their combinations.

2-2. Major Component Specifications

Detailed specifications for key components like compressors, fans, and heat exchangers.

2-3. Other Component Specifications

Specifications for sensors and other minor components used in the unit.

3. Dimensional Data

4. Refrigerant Flow Diagram

4-1. Refrigerant Flow Diagram

Diagram illustrating refrigerant flow paths for the outdoor unit.

5. Performance Data

5-1. Temperature Charts

Performance charts showing cooling and heating characteristics at various temperatures.

5-2. Cooling Capacity

Tables detailing cooling capacity under various indoor and outdoor temperature conditions.

5-3. Cooling Capacity (Low Ambient)

Cooling capacity data specifically for low ambient outdoor temperature operation.

5-4. Heating Capacity

Tables detailing heating capacity under various indoor and outdoor temperature conditions.

6. Electrical Data

6-1. Electric Wiring Diagrams

Schematics for electrical connections and wiring of the outdoor unit.

7. Functions

7-1. Explanation of Functions

Description of various operating modes and functional behaviors of the air conditioner.

7-2. Protective Functions

Explanation of safety features like defrost, current control, and freeze protection.

8. Troubleshooting (Before Calling for Service)

8-1. Precautions before Performing Inspection or Repair

Safety guidelines for handling electronic circuits and high-voltage components during service.

8-2. Trouble Diagnosis by Error Monitor Lamps

Interpreting error codes indicated by monitor lamps on the control board.

8-3. Checking the Outdoor System

Procedures for verifying the operational status of the outdoor unit and its components.

8-4. Trouble Diagnosis of Each Part

Mapping common problems to specific parts and inspection points for diagnosis.

8-5. Trouble Diagnosis of Fan Motor

Troubleshooting steps for diagnosing issues with the outdoor fan motor.

9. Refrigerant R410 A: Special Precautions When Servicing Unit

9-1. Characteristics of New Refrigerant R410 A

Properties and handling guidelines for R410A refrigerant during servicing.

9-2. Checklist before Servicing

Pre-service checks and tool requirements specific to R410A.

9-3. Tools Specifically for R410 A

List of specialized tools required for servicing R410A systems.

9-5. In Case of Compressor Malfunction

Procedure for replacing a malfunctioning compressor, including refrigerant handling.

9-6. In Case Refrigerant is Leaking

Steps for detecting, repairing, and recharging refrigerant after a leak.

9-7. Charging Additional Refrigerant

Guidelines for adding refrigerant, especially when extending tubing.

Appendix A Installation Instructions