Panasonic CU-4KS31NBU User Manual (English)

Other manuals for Panasonic CU-4KS31NBU

Operating Instructions18 pages

Installation Manual14 pages

Questions and Answers:

S
Stacy MontgomeryAug 14, 2025
Why is my Panasonic Air Conditioner not cooling properly?
- Z
  zparksAug 15, 2025
  If your Panasonic Air Conditioner isn't cooling well, several factors could be the cause. First, a dirty or clogged air filter restricts airflow, so clean it. Second, eliminate any heat sources in the room or reduce the number of people present, if possible. Third, shut any open doors or windows to keep heat out. Ensure there are no obstacles near the air intake or discharge port to maintain good airflow. Finally, lower the thermostat setting for more effective cooling.
T
Tara GallegosAug 17, 2025
How to fix a Panasonic CU-4KS31NBU Air Conditioner that won't turn on?
- T
  thomasjenniferAug 18, 2025
  If your Panasonic Air Conditioner isn't running, check these potential causes: a power failure (restore power), a tripped leakage circuit breaker (contact service center), line voltage that is too low (consult your electrician or dealer), or depleted batteries in the remote controller (replace batteries).
R
ronaldgordonAug 21, 2025
What to do if Panasonic Air Conditioner compressor runs but soon stops?
- G
  Gregory EatonAug 21, 2025
  If the compressor of your Panasonic Air Conditioner runs briefly and then stops, there may be an obstruction in front of the condenser coil of the outdoor unit. Remove any obstruction to resolve this issue.
G
Gary ObrienAug 25, 2025
What does it mean when the operation lamp blinks on a Panasonic Air Conditioner?
- D
  Dr. Catherine FreyAug 26, 2025
  If the OPERATION lamp on your Panasonic Air Conditioner is blinking and the unit isn't working, there may be a system issue. Contact service center.
D
Derek CarrAug 28, 2025
What does it mean when the timer lamp blinks on a Panasonic Air Conditioner?
- J
  Joseph ChapmanAug 28, 2025
  If the TIMER lamp on your Panasonic Air Conditioner blinks at 3-second intervals and the unit isn't operating, the FLOAT SWITCH is activated. Contact service center.
M
Mary HansenAug 31, 2025
How to fix fan motor rotation speed if it does not change during Panasonic CU-4KS31NBU Air Conditioner outdoor unit operation?
- C
  Connie SparksAug 31, 2025
  If the fan motor rotation speed does not change during outdoor unit operation of your Panasonic Air Conditioner, first replace the outdoor unit controller, then (if necessary) replace the DC motor.
R
Roger LawsonSep 3, 2025
Why the fan does not stop when the Panasonic CU-4KS31NBU Air Conditioner outdoor unit stops?
- W
  Whitney WhiteSep 3, 2025
  If the fan doesn't stop when the outdoor unit of your Panasonic Air Conditioner stops, the outdoor unit controller might be faulty.
D
Daniel GreenSep 6, 2025
What to do if fan motor does not rotate when the Panasonic CU-4KS31NBU outdoor unit is operating?
- G
  Gregory AshleySep 6, 2025
  If the fan motor does not rotate when the outdoor unit of your Panasonic Air Conditioner is operating, disconnect the motor connectors and measure the voltage at the DC motor connectors on the outdoor unit controller.
A
Amy HollowaySep 10, 2025
Why does my Panasonic Air Conditioner make a clicking sound?
- H
  Harold HowellSep 10, 2025
  If you hear a clicking sound from your Panasonic Air Conditioner during cooling operation, it is likely due to plastic parts shrinking from a sudden temperature change. This is normal, and the sound should disappear soon.

Panasonic CU-4KS31NBU Specifications

General

Heating Capacity	34, 000 BTU
HSPF	9.0
Refrigerant	R410A
Outdoor Unit Noise Level	55 dB(A)
Type	Multi-Split
Cooling Capacity	31, 000 BTU
Energy Efficiency Ratio (EER)	3.5
Voltage	208/230 V
Power Supply	Single Phase
Coefficient of Performance (COP)	3.5
Indoor Unit Dimensions (W x H x D)	Varies by model
Outdoor Unit Dimensions (W x H x D)	37 x 13 inches
Indoor Unit Weight	Varies by model
Air Flow (Indoor Unit)	Varies by model