6
How to use
Auto OFF/ON button
AUTO
OFF/ON
Use when remote control is misplaced or a malfunction occurs. Raise the front panel:
1. Press the button once to use in AUTO mode.
2. Press and hold the button until you hear 1 beep, then release to use in forced
COOL mode.
3. Repeat step 2. Press and hold the button until you hear 2 beeps, then release to
use in forced HEAT mode.
• Press the button again to turn off.
FAN SPEED
To select fan speed
(Remote control display)
• For AUTO, the indoor fan speed is automatically
adjusted according to the operation mode.
Single
Single split system
Multi
Multi split system
To optimise energy saving
ECONAVI
MODE
To select operation mode
AUTO - For your convenience
HEAT - To enjoy warm air
COOL - To enjoy cool air
DRY - To dehumidify the environment
SLEEP
To maximise comfort while
sleeping
(CANCEL)
•
This operation provides you with a comfortable
environment while sleeping. It will automatically
adjust the sleep pattern temperature during the
activation period.
•
The indoor unit indicator will dim when this
operation is activated. This is not applicable if the
indicator brightness has been manually dimmed.
•
This operation is incorporated with the activation
timer (0.5, 1, 2, 3, 4, 5, 6, 7, 8 or 9 hours).
•
This operation can be set together with single
timer or twin timer. Sleep operation has the
priority over OFF timer.
•
This operation can be cancelled by pressing the
respective button when the sleep timer reaches
0.0h.
To switch between powerful &
quiet
(Remote control display)
POWERFUL
QUIET
(NORMAL)
POWERFUL: To reach temperature quickly
•
This operation stops automatically after 20
minutes.
QUIET: To enjoy quiet operation
• This operation reduces airfl ow noise.
ON
OFF
TIMER
CANCEL
FAN SPEED
MODE
SLEEP
MILD DRY
AIR SWING
TEMP
OFF/ON
SET
To Next Page
Loading...
