EasyManua.ls Logo

Panasonic CU-NE9JKE - Page 4

Panasonic CU-NE9JKE
8 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
HEAT
+8/10˚C
4
PRODUCT OVERVIEW & OPERATIONS PRODUCT OVERVIEW & OPERATIONS
Front panel
Receiver
e-ion AIR PURIFYING SYSTEM
Do not touch during operation
e-ion lters e-ion charging wire Active e-ion Generator
Maximum
distances: 8m
Horizontal air ow
direction louver
• Manually
adjustable.
Remote control
display
Vertical air ow
direction louver
Do not adjust
by hand.
INDICATOR
(Blue)
(Green)
(Orange)
(Orange)
(Orange)
(Blue)
+8/10°C HEAT
+8/10°C HEAT
(Green)
TO TURN ON OR OFF THE UNIT
Please be aware of the OFF indication on the remote
control display to prevent the unit from starting/stopping
improperly.
TO SET TEMPERATURE
Selection range: 16°C ~ 30°C (Not applicable for FAN mode).
Operating the unit within the recommended temperature
could induce energy saving.
HEAT mode : 20°C ~ 24°C.
COOL mode : 26°C ~ 28°C.
DRY mode : 1°C ~ 2°C lower than room temperature.
TO SELECT OPERATION MODE
AUTO mode - For your convenience
During operation mode selection the power indicator blinks.
Unit selects operation mode every 30 minutes according
to temperature setting, outdoor and room temperature.
HEAT mode - To enjoy warm air
Unit takes a while to warm up. The power indicator
blinks during this operation.
COOL mode - To enjoy cool air
DRY mode - To dehumidify the environment
Unit operates at low fan speed to give a gentle cooling
operation.
FAN mode - To circulate air in the room
Auto OFF/ON button
Used when remote control is misplaced or
malfunction.
Step Action Mode
1 Press once. Automatic
2
Press and hold until you
hear one beep, then
release.
Force
cooling
3
Repeat step 2. Press
and hold until you
hear two beeps, then
release.
Normal
cooling
4
Repeat step 3. Press
and hold until you
hear three beeps, then
release.
Force
heating
Press the button to turn off.

Related product manuals