To Next PageTo Next PageHow to improve HEAT/COOL mode efficiency on Panasonic Air Conditioner?
To improve the efficiency of the HEAT/COOL mode on your Panasonic Air Conditioner: * Ensure the temperature is set correctly. * Close all doors and windows to prevent heat loss or gain. * Clean or replace the filters to maintain proper airflow. * Clear any obstructions from the air inlet and outlet vents.
Why Panasonic CU-NZ9SKE doesn't receive signal from remote control?
If your Panasonic Air Conditioner is not receiving the signal from the remote control, ensure that the receiver is not obstructed. Certain fluorescent lights may interfere with the signal transmitter.
Steps to insert batteries into the remote control for initial setup.
Steps for basic operation like selecting mode, starting/stopping, and temperature.
Safety warnings specific to the indoor and outdoor units regarding hazards.
Specific safety advice for handling and using R32 refrigerant.
Safety precautions concerning the power supply cord, connections, and usage.
Safety precautions for unit placement, cleaning, and environmental factors.
Explanation of the ECONAVI feature for optimizing energy saving.
How the ECONAVI feature uses sunlight to adjust operation.
Critical conditions requiring immediate shutdown and professional service.
Steps to insert batteries into the remote control for initial setup.
Steps for basic operation like selecting mode, starting/stopping, and temperature.
Safety warnings specific to the indoor and outdoor units regarding hazards.
Specific safety advice for handling and using R32 refrigerant.
Safety precautions concerning the power supply cord, connections, and usage.
Safety precautions for unit placement, cleaning, and environmental factors.
Explanation of the ECONAVI feature for optimizing energy saving.
How the ECONAVI feature uses sunlight to adjust operation.
Critical conditions requiring immediate shutdown and professional service.
General| Cooling Capacity | 2.5 kW |
|---|---|
| Refrigerant | R32 |
| Power Supply | 220-240V, 50Hz |
| Indoor Unit Weight | 9 kg |
| Type | Wall-mounted |
| Noise Level (Indoor) | 19 dB(A) |
