What does it mean when the POWER indicator blinks and stops during COOL/DRY mode on my Panasonic Air Conditioner?
When the POWER indicator blinks and stops during COOL/DRY mode on your Panasonic Air Conditioner, it means the system has locked to operate in HEAT mode only.
What to do if my Panasonic CU-NZ50VKE Air Conditioner unit does not work?
If your Panasonic Air Conditioner unit isn't working, check if the circuit breaker has tripped or if any timers have been set.
How to dim the indicators on my Panasonic CU-NZ50VKE?
To dim or restore the brightness of the indicators on your Panasonic Air Conditioner, press and hold the button for 5 seconds.
Why doesn't my Panasonic CU-NZ50VKE remote control work?
If your Panasonic Air Conditioner remote control is not working, make sure the batteries are inserted correctly or replace weak batteries.
What to do if Panasonic CU-NZ50VKE Air Conditioner unit doesn't receive signal from remote control?
If the Panasonic Air Conditioner unit isn't receiving a signal from the remote control, make sure the receiver isn't obstructed. Note that certain fluorescent lights may interfere with the signal transmitter; please consult an authorized dealer in such cases.
Why does my Panasonic CU-NZ50VKE make a water flowing sound during operation?
The water flowing sound you hear during operation of your Panasonic Air Conditioner is due to refrigerant flow inside the unit.
Why does my room have a peculiar odor when using my Panasonic CU-NZ50VKE Air Conditioner?
A peculiar odor in the room when using your Panasonic Air Conditioner may be due to a damp smell emitted by the wall, carpet, furniture, or clothing.
Why does my Panasonic CU-NZ50VKE Air Conditioner make a cracking sound during operation?
The cracking sound during operation of your Panasonic Air Conditioner is caused by temperature changes leading to the expansion and contraction of the unit.
Why does the indoor fan of my Panasonic CU-NZ50VKE Air Conditioner stop occasionally during automatic fan speed setting?
The indoor fan of your Panasonic Air Conditioner stops occasionally during automatic fan speed setting to help remove surrounding odors.
Why is there a delay after restarting my Panasonic Air Conditioner?
The delay you're experiencing after restarting your Panasonic Air Conditioner is a protection mechanism for the unit’s compressor.
How to turn the air conditioner on and off using the remote.
Instructions on choosing the desired mode (Heat, Cool, Dry, Fan, Auto).
How to adjust the desired temperature setting for the unit.
Essential warnings and cautions for safe operation, handling, and installation.
Guidelines for safe use, installation, and servicing of R32 refrigerant.
Safety measures for proper installation, repair, and ongoing maintenance.
Steps for connecting the air conditioner to a wireless network via WPS or AP mode.
Identifying normal operating behaviors vs. potential malfunctions.
Procedure to retrieve error codes using the remote control.
General| Cooling Capacity | 5.0 kW |
|---|---|
| Heating Capacity | 6.0 kW |
| Coefficient of Performance (COP) | 4.00 |
| Power Supply | 220-240 V, 50 Hz |
| Refrigerant | R32 |
| Outdoor Unit Dimensions (W x H x D) | 780 x 542 x 289 mm |
| Weight (Indoor Unit) | 10 kg |
| Noise Level (Outdoor Unit) | 48 dB(A) |
| Type | Split System |
To Next Page
