To Next PageTo Next PageWhy does my Panasonic CU-S18KKQ indoor fan stop occasionally during automatic fan speed setting?
The indoor fan in your Panasonic Air Conditioner stops occasionally during automatic fan speed setting to remove surrounding odours. Select QUIET operation to maintain consistent air flow.
Why is there an operation delay after I restart my Panasonic CU-S18KKQ?
The delay you experience after restarting your Panasonic Air Conditioner is a protection mechanism for the unit’s compressor.
Why does the power indicator blink on my Panasonic CU-S18KKQ before it is switched on?
The blinking power indicator on your Panasonic Air Conditioner before it's switched on is a preliminary step in preparation for operation when the ON timer has been set.
Why is my Panasonic CU-S18KKQ Air Conditioner making a cracking sound during operation?
The cracking sound you hear during the operation of your Panasonic Air Conditioner is caused by changes in temperature, leading to the expansion and contraction of the unit.
Why is there inconsistent air flow during PATROL operation in my Panasonic CU-S18KKQ?
The inconsistent airflow during PATROL operation in your Panasonic Air Conditioner is because the fan speed is adjusted automatically during patrol operation.
General| Brand | Panasonic |
|---|---|
| Model | CU-S18KKQ |
| Category | Air Conditioner |
| Language | English |
Explains the meaning of warning and caution signs used in the manual.
Describes symbols indicating forbidden and required actions.
Safety guidelines for indoor and outdoor units, including child safety.
Safety precautions related to the remote control and its batteries.
Precautions regarding power cords, outlets, and wet hands to prevent fire and shock.
Recommendations for cord replacement, ELCB/RCD, and earthing for electrical safety.
When to switch off power supply for safety during cleaning, non-use, or lightning.
Safety measures for unit operation, cleaning, installation, and environment.
Advice on battery usage and handling for the remote control.
Explains the various indicators on the remote control display.
Details on turning the unit on/off, setting temperature, and selecting modes.
Instructions for adjusting vertical/horizontal airflow and fan speed.
How to use the Human Presence & Activity monitor for energy saving.
How to use PATROL and e-ion functions for clean and fresh air.
Using MILD DRY mode for humidity and QUIET mode for reduced noise.
How to quickly reach temperature and set timers for unit operation.
Identifies key components of the indoor unit, including the front panel and sensors.
Instructions for cleaning the indoor unit, front panel, and e-ion filters.
Details on the e-ion system, patrol sensor, and manual airflow adjustment.
Symptoms that do not indicate a malfunction during normal operation.
Common issues and checks to perform before calling for servicing.
Important notes regarding the ECO PATROL sensor's detection capabilities.
Procedure to retrieve error codes from the unit using the remote control.
Steps for inserting batteries and preparing the remote control for use.
How to select the desired operation mode (AUTO, COOL, DRY).
Instructions for starting/stopping the unit and setting the desired temperature.
