M
Matthew JonesSep 5, 2025
Why does mist emerge from my Panasonic Air Conditioner indoor unit?
- RRyan FloresSep 5, 2025
The mist emerging from the indoor unit of your Panasonic Air Conditioner is a condensation effect due to the cooling process.
To Next PageTo Next PageWhy does mist emerge from my Panasonic Air Conditioner indoor unit?
The mist emerging from the indoor unit of your Panasonic Air Conditioner is a condensation effect due to the cooling process.
How to fix a noisy Panasonic CU-TZ24SKE?
If your Panasonic Air Conditioner is noisy during operation, check if the unit has been installed at an incline. Also, ensure that the front panel is closed properly.
What to do if Panasonic CU-TZ24SKE remote control does not work?
If the remote control for your Panasonic Air Conditioner isn't working, first, ensure the batteries are inserted correctly. If the display is dim or the transmission signal is weak, try replacing the batteries.
Why does the POWER indicator blink during HEAT mode with no warm air from my Panasonic CU-TZ24SKE Air Conditioner?
The POWER indicator blinks during HEAT mode with no warm air supply because the unit is in defrost mode and AIR SWING is set to AUTO.
What to do if my Panasonic CU-TZ24SKE unit doesn't receive the signal from the remote control?
If the Panasonic Air Conditioner unit isn't receiving the signal from the remote control: * Make sure the receiver is not obstructed. * Certain fluorescent lights may interfere with signal transmitter. Please consult authorised dealer.
Why doesn't my Panasonic Air Conditioner remote control work?
If your Panasonic Air Conditioner remote control isn't working, it could be due to the following: * Insert the batteries correctly. * Replace weak batteries.
What to do if my Panasonic CU-TZ24SKE HEAT/COOL mode isn't working efficiently?
If your Panasonic Air Conditioner's HEAT/COOL mode isn't working efficiently, try the following: * Set the temperature correctly. * Close all doors and windows. * Clean or replace the filters. * Clear any obstruction at the air inlet and air outlet vents.
Why does the indoor fan stop during heating in my Panasonic CU-TZ24SKE Air Conditioner?
The indoor fan in your Panasonic Air Conditioner stops occasionally during heating operation to avoid an unintended cooling effect.
Why does the POWER indicator blink during HEAT mode in my Panasonic CU-TZ24SKE?
If the POWER indicator blinks during HEAT mode with no warm air supply and the louver is closed on your Panasonic Air Conditioner, the unit is in defrost mode, and AIR SWING is set to AUTO.
What causes a cracking sound in Panasonic Air Conditioner during operation?
The cracking sound you hear during the operation of your Panasonic Air Conditioner is due to temperature changes causing the expansion and contraction of the unit.
General| Energy Efficiency Ratio (EER) | 3.21 |
|---|---|
| SEER | 6.10 |
| Coefficient of Performance (COP) | 3.61 |
| Refrigerant | R32 |
| Weight (Indoor Unit) | 12 kg |
| Energy Efficiency Class Cooling | A++ |
| Power Supply | 230 V, 50 Hz |