Why does my Panasonic CU-TZ35TKE Air Conditioner's outdoor unit emit water or steam?
The water or steam emitted from the outdoor unit of your Panasonic Air Conditioner is due to condensation or evaporation occurring on the pipes.
How to improve HEAT/COOL mode efficiency in Panasonic Air Conditioner?
If your Panasonic Air Conditioner isn't working efficiently in HEAT/COOL mode, ensure the temperature is set correctly, all doors and windows are closed, the filters are clean or replaced, and there are no obstructions at the air inlet and outlet vents.
What to do if Panasonic Air Conditioner remote control does not work?
If your Panasonic Air Conditioner unit isn't responding to the remote control, first ensure the batteries are correctly inserted or replace them if they are weak.
Why is the TIMER indicator always on in my Panasonic CU-TZ35TKE Air Conditioner?
The TIMER indicator is always on because the timer setting repeats daily once set.
Why does my Panasonic Air Conditioner outdoor unit emit water or steam?
The outdoor unit emits water or steam because condensation or evaporation occurs on the pipes.
How to reduce noise during Panasonic Air Conditioner operation?
If your Panasonic Air Conditioner is noisy during operation, check whether the unit has been installed at an incline and ensure that the front panel is properly closed.
Why Panasonic CU-TZ35TKE Air Conditioner unit doesn't receive signal from remote control?
If your Panasonic Air Conditioner unit isn't receiving the signal from the remote control, ensure that the receiver is not obstructed. Note that certain fluorescent lights may interfere with the signal transmitter; consult an authorized dealer for assistance.
What to do if Panasonic CU-TZ35TKE unit does not work?
If your Panasonic Air Conditioner unit does not work, check if the circuit breaker is tripped and verify that timers have not been set.
Why does the POWER indicator blink on my Panasonic CU-TZ35TKE before it turns on?
The POWER indicator on your Panasonic Air Conditioner might blink before the unit is switched on as a preliminary step in preparation for operation when the ON timer has been set. When the ON Timer is set, the unit may start earlier (up to 35 minutes) before the actual set time in order to achieve the desired temperature on time.
Why is my Panasonic CU-TZ35TKE making a cracking sound during operation?
The cracking sound during operation is caused by changes in temperature that lead to the expansion and contraction of the unit's components.
Steps to insert batteries into the remote control.
Guide to setting the clock on the remote control.
How to choose operation mode (AUTO, HEAT, DRY, COOL).
How to turn the unit on and off.
Adjusting temperature settings and units (°C/°F).
Warnings and cautions for appliance use, including R32 refrigerant.
Specific safety measures for appliances using R32 refrigerant.
General| Cooling Capacity | 3.5 kW |
|---|---|
| Heating Capacity | 4.0 kW |
| Refrigerant | R32 |
| Power Supply | 220-240 V, 50 Hz |
| Outdoor Unit Dimensions (W x H x D) | 780 x 542 x 289 mm |
| Noise Level (Indoor) | 20 dB(A) |
| Type | Split System |
To Next Page
