To Next PageTo Next PageWhat to do if my Panasonic CU-V50BBP8 Air Conditioner does not operate after turning it on?
If your Panasonic Air Conditioner doesn't turn on, first check for a power outage. If there was a power outage, turn the operation button off and then on again. Next, ensure the circuit breaker is on; if it's off, switch it on. Finally, check the batteries in the wireless remote control and replace them if they are weak.
How to clean a clogged air filter in a Panasonic Air Conditioner?
To clean a clogged air filter in your Panasonic Air Conditioner and restore the unit’s efficiency, use a vacuum cleaner or wash it with water.
What to do if I wiped my Panasonic CU-V50BBP8 Air Conditioner with benzine or thinner?
If you have wiped your Panasonic Air Conditioner with benzine or thinner, which can cause discoloration or flaking, wipe the unit with a dry, soft cloth or a cloth slightly moistened with water or a neutral detergent solution.
General| Refrigerant | R32 |
|---|---|
| Indoor Unit Dimensions (W x H x D) | 1070 x 290 x 241 mm |
| Outdoor Unit Dimensions (W x H x D) | 824 x 619 x 299 mm |
| Inverter | Yes |
| Star Rating | 3 Star |
| Type | Split AC |
| Power Supply | 230 V, 50 Hz |
Guidelines and warnings for safely installing the air conditioning unit, emphasizing professional installation.
Important warnings and cautions to ensure safe and proper operation of the air conditioner.
Details the names and functions of all buttons and display elements on the wired remote control.
Instructions on how to operate the air conditioner using the wired remote control without timer functions.
Guide on setting and using timer operations with the wired remote control for automatic start/stop.
Instructions on how to adjust the airflow direction using the wired remote control.
Step-by-step guide on how to insert batteries into the wireless remote control.
Identifies and explains the buttons and display features of the wireless remote control.
How to operate the air conditioner using the wireless remote control for basic functions without timers.
Instructions for setting timer operations using the wireless remote control.
Guide to adjusting the airflow direction with the wireless remote control.
Information about the IR receiver and setting addresses for multi-unit control.
