Why is my Panasonic CU-Z35VKR remote control not working?
If your Panasonic Air Conditioner remote control isn't working, ensure the batteries are inserted correctly. If the display is dim or the transmission signal is weak, try replacing the batteries with new ones.
Why is the TIMER indicator always on on my Panasonic CU-Z35VKR?
The timer setting repeats daily once set.
Why is my Panasonic CU-Z35VKR Air Conditioner making a louder noise at the outdoor unit during early operation of i AUTO-X?
The compressor and fan rotate at a higher speed to boost cooling performance during initial operation.
Why does the POWER indicator blink on my Panasonic CU-Z35VKR Air Conditioner before it's switched on?
The blinking POWER indicator is a preliminary step in preparation for operation when the ON timer has been set. When the ON Timer is set, the unit may start earlier (up to 35 minutes) before the actual set time in order to achieve the desired temperature on time.
Why does airflow continue after I stop my Panasonic CU-Z35VKR Air Conditioner?
The airflow continues even after operation has stopped because the unit is extracting remaining heat from the indoor unit, which can take up to 30 seconds.
Why is my Panasonic Air Conditioner making a cracking sound during operation?
The cracking sound during operation is caused by changes in temperature, leading to the expansion or contraction of the unit.
Why does my Panasonic CU-Z35VKR make a water flowing sound during operation?
The water flowing sound you hear during operation is due to the refrigerant flow inside the unit.
Why is there a delay after restarting my Panasonic Air Conditioner?
The delay is a protection mechanism for the unit’s compressor.
Why does mist emerge from my Panasonic Air Conditioner indoor unit?
The mist emerging from the indoor unit is a condensation effect due to the cooling process.
Why does the room have a peculiar odour when using my Panasonic CU-Z35VKR Air Conditioner?
This may be due to a damp smell emitted by the wall, carpet, furniture, or clothing.
Step-by-step instructions for installing batteries in the remote control.
Guide on how to set the current time on the remote control unit.
How to choose desired modes like AUTO, HEAT, COOL, and DRY.
Instructions for setting temperature and switching between Celsius and Fahrenheit.
Covers essential warnings for units, power, remote, and flammable refrigerants.
Guidelines for safe installation, servicing, and refrigerant handling procedures.
Procedures for detecting refrigerant leaks and safe recovery practices.
Instructions for adjusting airflow direction and fan speed.
Guide to MILD DRY, ECO, i AUTO-X, nanoe X, and timer functions.
In-depth explanations of various operation modes and their features.
Instructions for cleaning the unit components and air filters.
Identifying normal operations and performing initial checks before service calls.
Troubleshooting common problems with the remote and the air conditioner unit.
Steps to retrieve diagnostic error codes for effective issue resolution.
Information regarding the collection and disposal of old equipment and batteries.
Explanation of symbols used in the manual for refrigerant and service.
General| Cooling Capacity | 3.5 kW |
|---|---|
| Heating Capacity | 4.0 kW |
| Power Supply | 220-240V, 50Hz |
| Refrigerant | R32 |
| Indoor Unit Dimensions (H x W x D) | 295 x 800 x 223 mm |
To Next Page
