To Next PageTo Next PageWhat to do if the electric current during Panasonic CU-Z35YKEA Air Conditioner operation is higher than specified?
If the electric current during operation is higher than the specified value, it is recommended to check the compressor and electrical connections.
What to do if the electric current during Panasonic CU-Z35YKEA operation is lower than specified?
If the electric current during operation is lower than the specified value, you should inspect the power source and compressor.
What to do if my Panasonic CU-Z35YKEA Air Conditioner has an excessive amount of refrigerant?
If your air conditioner has an excessive amount of refrigerant, reduce the amount of refrigerant.
What to do if the compressor in my Panasonic CU-Z35YKEA Air Conditioner is inefficient?
If the compressor is inefficient, replace or repair the compressor.
General| Cooling Capacity | 3.5 kW |
|---|---|
| Heating Capacity | 4.0 kW |
| Energy Efficiency Class Cooling | A++ |
| Energy Efficiency Class Heating | A+ |
| Power Supply | 220-240V, 50Hz |
| Refrigerant | R32 |
| Outdoor Unit Dimensions (W x H x D) | 780 x 542 x 289 mm |
| Type | Air Conditioner |
| Indoor Unit Noise Level | 21 dB(A) |
| Noise Level (Indoor Unit) | 21 dB (Low) |
Guides the user through selecting the preferred language for the remote controller interface.
Allows setting the current date and time in 24h or am/pm format for accurate operation.
Provides fundamental steps for starting, stopping, and adjusting basic air conditioner functions.
Enables rapid cooling/heating. Automatically stops after 20 minutes or based on conditions.
Reduces airflow noise for a quieter environment. Disabled by fan speed or powerful mode.
Allows scheduling of operation times and modes for each day of the week.
Allows selection of the indoor unit model type, e.g., Wall mounted, Floor console.
Enables or disables the heat mode functionality based on user preference or system configuration.
Applies WLAN settings for connecting to the Panasonic Comfort Cloud app.
Manages rotation between two units for air conditioning after a set interval.
Performs failure diagnosis and retrieves error codes for troubleshooting system issues.
Allows setting the current date and time on the remote controller.
Sets the display language for the remote controller's interface from a list of available languages.
Lists conditions requiring consultation with an authorized dealer, such as abnormal noise or water leaks.
Instructions on how to access error codes via the 'System check' function.
Lists error codes H00 to H99 related to communication, sensor, and component malfunctions.
Details error codes F11 to F99 related to valve, pressure, and protection mechanisms.
