10.1.5. Slide the Chassis out from the Cabinet.
10.2. How to Assemble the Expandable Panels(Left & Right).
1. Attach the Top angle to the Cabinet using screw Type B (3 pcs).
2. Insert Expandable Panels to the Cabinet sides as shown.
3. Attach a Panel Retainer on the first fold of each Expansion Panel
and secure Panel Retainers to Cabinet using screw Type C (2
each). The Panel Retainers are packed in the folds of the
Expansion Panels.
10.3. Cabinet Installation.
1. Cut the “Sealing Ribbon” to the proper length, and attach it along
27
To Next Page
Loading...
