10
Table 1-6 (Accessories for the Timer Wired Remote Controller)
Part Name Figure
‘Q’ty
Part Name Figure
‘Q’ty
Timer Wired Remote Controller
1 Spacers 2
1 Wood screws
2 Clamps
Machine screws
M4 × 1 in.
Connecting wiring
length 4 ft.
2
2
Small screws
M4 × 1-9/16 in.
Machine screws
M4 × 1 in.
Ceiling installation paper pattern
(
3-3/4 × 2-1/32 in.
)
<CZ-RWSC1U>
Part Name Figure
‘Q’ty
Part Name Figure
‘Q’ty
12
Carrier for ceiling installation 1 Wood screws 2
Wireless remote controller 1 Spacers 4
1 Wire joints 4
Batteries 2 Clamp
21
Separate type signal receiving unit
(comes with 7-7/8 in. wire)
Wireless remote controller
mounting cradle
1
PanasonicPAC-iIndoorUnitUS-le1010PanasonicPAC-iIndoorUnitUS-le1010 2011/11/0215:17:122011/11/0215:17:12