Why does the indoor fan stop during heating operation of my Panasonic CS-CZ25WKE Air Conditioner?
The indoor fan in your Panasonic Air Conditioner stops occasionally during heating operation to avoid unintended cooling effect.
What to do if my Panasonic CS-CZ25WKE Air Conditioner does not work?
If your Panasonic Air Conditioner isn't working, first check if the circuit breaker has tripped. Also, verify if any timers have been set, as they might be preventing the unit from turning on.
Why does my Panasonic CS-CZ25WKE Air Conditioner outdoor unit emit water or steam?
The water or steam emitted from your Panasonic Air Conditioner's outdoor unit is due to condensation or evaporation occurring on the pipes.
Why does my Panasonic CS-CZ25WKE remote control not work?
If the remote control for your Panasonic Air Conditioner isn't working, ensure the batteries are inserted correctly. If the display is dim or the transmission signal is weak, replace the batteries with new ones.
What to do if my Panasonic CS-CZ25WKE Air Conditioner doesn't receive the signal from the remote control?
If your Panasonic Air Conditioner isn't responding to the remote control, ensure that the receiver on the unit isn't obstructed. Be aware that certain fluorescent lights may interfere with the signal transmission.
Why does the POWER indicator blink and stop when operating COOL/DRY mode on my Panasonic CS-CZ25WKE?
If the POWER indicator blinks and stops when operating in COOL/DRY mode on your Panasonic Air Conditioner, the system has locked to operate in HEAT mode only.
Why does the POWER indicator blink during HEAT mode with no warm air from my Panasonic Air Conditioner?
If the POWER indicator is blinking during HEAT mode with no warm air supply and the flap is closed on your Panasonic Air Conditioner, the unit is in defrost mode, and AIR SWING is set to AUTO.
Why is the flap closed during deice operation on my Panasonic CS-CZ25WKE Air Conditioner?
During deice operation of your Panasonic Air Conditioner, the flap is closed because the AIR SWING is set to AUTO.
Why is there a delay when restarting my Panasonic CS-CZ25WKE?
The delay in operation after restarting your Panasonic Air Conditioner is a protection mechanism for the unit’s compressor.
Why does my Panasonic CS-CZ25WKE Air Conditioner make a cracking sound during operation?
The cracking sound you hear during the operation of your Panasonic Air Conditioner is due to the expansion and contraction of the unit caused by temperature changes.
Explains the meaning of warning and caution symbols for safe operation.
Precautions for unit handling, power supply, and electrical safety.
Warning about the flammability of R32 refrigerant and potential fire risks.
Safety procedures for work and response to refrigerant leaks.
Acceptable leak detection methods and refrigerant removal procedures.
Procedures for charging refrigerant and safely decommissioning the system.
Safety for cylinder handling, equipment labelling, and refrigerant recovery.
Details actions that are prohibited or compulsory for safe use.
Safety requirements for installing and operating units with R32 refrigerant.
Ensuring fire safety and adequate ventilation during operations.
Methods for detecting flammable refrigerants without using ignition sources.
How to respond to abnormalities and prevent electrical hazards.
Precautions for handling, installation, and servicing with R32 refrigerant.
Checks to perform before contacting a service technician for issues.
General| Type | Split system |
|---|---|
| Cooling Capacity | 2.5 kW |
| Heating Capacity | 3.2 kW |
| Seasonal Energy Efficiency Ratio (SEER) | 6.8 |
| Coefficient of Performance (COP) | 4.0 |
| Energy Efficiency Class Cooling | A++ |
| Energy Efficiency Class Heating | A+ |
| Power Supply | 220-240 V, 50 Hz |
| Refrigerant | R32 |
| Outdoor Unit Dimensions (W x H x D) | 780 x 542 x 289 mm |
| Weight (Indoor Unit) | 9 kg |
| Noise Level (Outdoor) | 47 dB(A) |
| Noise Level (Indoor) | 20 dB(A) |
To Next Page
