To Next PageTo Next PageWhy is the electric current higher than specified during Panasonic CS-CZ25ZKE operation?
If the electric current during operation of your Panasonic Air Conditioner is higher than specified, it could be due to a dusty condenser preventing heat radiation. Measuring electric current during operation can help to verify this.
Why is gas side pressure high in cooling mode in Panasonic Air Conditioner?
High gas side pressure in cooling mode for your Panasonic Air Conditioner might be due to an inefficient compressor. Measuring gas side pressure can help to identify this.
General| Cooling Capacity | 2.5 kW |
|---|---|
| Heating Capacity | 3.2 kW |
| Energy Efficiency Class (Cooling) | A+++ |
| Energy Efficiency Class (Heating) | A++ |
| Refrigerant | R32 |
| Power Supply | 220-240V, 50Hz |
| Outdoor Unit Dimensions (W x H x D) | 780 x 542 x 289 mm |
| Indoor Unit Weight | 9 kg |
| Type | Split System |
| Noise Level (Indoor Unit) | 20 dB(A) |
| Noise Level (Indoor) | 19 dB(A) |
Essential safety rules and warnings for installation and servicing.
Specific safety measures and precautions for handling R32 refrigerant.
Detailed technical specifications including cooling, heating, and electrical data.
Comprehensive guide for installing the air conditioning unit.
Guidelines for choosing optimal installation sites for indoor and outdoor units.
Procedures for indoor unit installation, including mounting plate and piping.
Specific installation methods for the indoor unit based on piping configurations.
Procedures for outdoor unit installation, including piping and leak testing.
Steps for connecting refrigerant piping, including flaring and torque specifications.
Method for performing air tightness tests on the refrigeration system using a vacuum pump.
Procedures for installing and servicing units using R32 refrigerant.
Comparison of R32 characteristics with R410A and R22 refrigerants.
Details on refrigerant piping installation and the tools required.
A list of essential tools for refrigerant piping installation and servicing.
Techniques and procedures for brazing and repairing refrigerant cycles.
Overview of the basic functions and inverter control logic.
How to activate and control quiet operation for cooling and dry modes.
Setting and operating ON and OFF timers for the unit.
Special heating operation for low ambient temperatures to protect against cold.
Safety controls that protect the unit during all operating modes.
Specific protection controls active during cooling and soft dry modes.
Protection controls specifically for heating operation.
Diagnosing issues related to the refrigerant cycle, pressure, and temperature.
How to use the self-diagnosis function to identify errors.
A comprehensive table listing all error codes, their causes, and checks.
Step-by-step troubleshooting methods for specific error codes.
Troubleshooting steps for communication errors between indoor and outdoor units.
Step-by-step instructions for disassembling indoor unit components.
Procedure for removing the front grille of the indoor unit.
Steps to remove the cross flow fan and indoor fan motor.
Instructions for removing the electronic controller from the outdoor unit.
Performance data for cooling mode under various conditions.
Performance data for heating mode under various conditions.
Correction factors for cooling and heating capacity based on piping length.
Exploded view and part list for the indoor unit.
