10
2
Remove the top case.
Use a at head screwdriver or similar
tool to push in the catch on the bottom
case and remove the top case.
Take care not to break the catch when
pushing with the screwdriver.
3
When attaching the bottom
case to the wall
Screws (supplied): 2
Attach the WLAN Adaptor to the wall
with the UP mark facing upwards.
Please ensure screws are tightened
rmly. Do not overtighten screws as
this may damage the casing.
Ensure that the screws do not contact
metallic parts within the wall.
4
Attach the top case.
Fit the upper catches before
tting the lower catch.
Take care not to pinch the
communication lines in the
case.
Top case
Bottom case
Catch
Bottom case
Screw (supplied)
Wall to which the
WLAN Adaptor is xed
Upper catches (2 places)
Lower catch
When tting the lower catch, press down on it with a at head
screwdriver or similar tool and then t the top case onto it.
* Note that applying too much pressure to the at head screwdriver
may result in damage to the catch.
Top case
Bottom case
1_WLAN Adaptor_CZ-CAPWFC1_En.indd 10 2018/12/27 18:13:50
To Next Page
Loading...
