6
Quick Guide
1
Press
to start/stop the
operation.
2
Press
to select either
mode, set temperature, fan speed or
air swing section.
• Use
or to select setting.
• Press
to confi rm the selection.
Mode section
Default setting for Mode is Auto.
AUTO HEAT
COOL
DRYFAN
Stand-alone operation.
To access nanoe™ stand-alone while operation
is OFF, press
(Quick Menu) and select
(nanoe™).
Note:
Set temperature is disabled and not displayed.
Set temperature section
Selection range:
16.0 °C ~ 30.0 °C / 60 °F ~ 86 °F.
Fan speed section
• When FAN AUTO is selected, the fan
speed is adjusted automatically according
to the operation mode.
• Select the lowest fan speed to have a low
noise operation.
AUTO
Flap (Air swing) section
• Do not adjust the fl ap by hand.
Up/Down Air Swing
(Wall Mounted)
(Floor Console)
*not applicable
Left/Right Air Swing
Note:
• Not applicable for Floor Console.
• To change the horizontal airfl ow direction
for Floor Console, move the vertical vane
manually before starting operation.
Basic operation
12:00,Mon
SET TEMP.
FAN SPEED
25
.0
FLAP
AUTO
AUTO
MODE
AUTO
1
2
ACXF55-33860.indb 6ACXF55-33860.indb 6 8/19/2022 7:20:31 PM8/19/2022 7:20:31 PM
To Next Page
Loading...
