Heating Mode: This mode is used for normal heating operation.
Standby:
For several minutes after the start of heating operation the indoor
fan will not start running(or at very low speed) until the indoor heat
exchanger has warmed up sufficiently. This prevents a cold air draft from
entering the space. During this period the Standby
icon remains displayed.
Standb
Icon
Heatin
Mode Icon
Mode select Button
Cooling Mode: Used for normal cooling operation
Coolin
Mode Icon
Mode select Button
Fan Mode: Used to run fan only without heating or cooling operation.
Fan
Mode Icon
Mode select Button
To Next Page
Loading...
