Panasonic CZ-RTC2

3-41
Control of 2WAY SYSTEM
1
2
3
4
5
6
7
8
9
3. Timer Remote Controller
4. Set the program pattern.
(program step 3)
There are 4 program patterns.
Pressing
/ repeats the following display patterns.
Pattern 1
The indoor unit starts operation at the programmed
time.
Pattern 2
The indoor unit stops operation at the programmed
time.
Pattern 3
The indoor unit starts operation at the programmed
time and changes the temperature settings.
Press
/ to change the temperature setting.
Pattern 4
The indoor unit changes the temperature setting at
the programmed time.
Press
/ to change the temperature setting.
Pattern 1
Pattern 2
Pattern 3
Pattern 4
Weekly Program Function (Continued)
Select the program pattern and press . The program timer setting is confi rmed and the unit enters the confi rmation mode .
NOTE
If you press during the setting, it returns to the program confi rmation mode.
If there is no operation made for 3 minutes during the setting, it returns to the normal mode.
In this case, all the settings in progress will be invalid.
TD831151-002WAY.indb41TD831151-002WAY.indb41 2011/01/1317:07:582011/01/1317:07:58