12
(EN)
Flap Setting for Each Indoor Unit
FLAP
When setting fl aps for each indoor unit
• Flaps of all air outlets of 1 indoor unit face the same
direction.
1
Display the menu screen.
To return to the previous screen
Press .
To return to the top screen
Press 2 times.
2
Select [FLAP].
▲ ▼ →
3
Select the indoor unit to set.
▲ ▼ → ►
• ALL: All units connected to the remote
controller
e.g. (unit) ALL → 1-1 → 1-2 to 1-8
4
Select the fl ap direction.
▲ ▼ →
(Press 2 times to fi nish.)
• Pressing ▲ or ▼ during swing
can stop the fl ap at your
preferred position.
• Pressing ▲ or ▼ while swing is stopped
sets the fl ap at the specifi ed position.
When ▲ is pressed
When ▼ is pressed
• 3-level adjustment is possible for Cool
and Dry mode.
Swing
e.g. unit 1-1 e.g. unit 1-3
To Next Page
Loading...
