Panasonic CZ-RTC5A

5
 Setting information icons displayed on the top screen
1 When inspection is required
2 Appears if there is a problem on ECONAVI.
3 Prevents the room temperature from
increasing too much (or decreasing too
much) when no one is in the room.
4 Fresh air is used for ventilation.
(Only when connecting a heat exchange
ventilation unit or connecting a commercially
sold fan.)
5 Energy saving operation is in process.
6 [Weekly timer] is set.
7 [ON/OFF timer] is set.
8 Remote control operation is restricted by a
central control device.
9 Switching operation modes is prohibited.
(Switching to Auto mode is also prohibited.)
10 The engine oil needs to be replaced.
(Only when using a gas heat pump air
conditioner.)
11 The indoor unit fi lter needs to be cleaned.
 Operation stop screen  Item selection screen
 Lock screen display
Operation guide
[Operation lock] is functioning.
 To cancel lock
Press
button for 4 seconds.
Screen display (Menu screen)
Screen name Present time & day
The currently operable content is
simply displayed.
• ▲▼◄►: Cross key buttons
•
: Enter button
Operation guide
12 3456
7
8
9
10 11
“Circulation” is set.
(Not displayed when all the left
icons are displayed.)
Cursor
業務用リモコンCZ-RTC5A簡単ガイド.indd5業務用リモコンCZ-RTC5A簡単ガイド.indd5 2016/08/1914:54:012016/08/1914:54:01