Panasonic CZ-RTC6BL

25
(EN)
Setting information list
Icon Description Page
Energy saving is on to control energy consumption. * –
The operation capacity of the outdoor unit is restricted. –
Units are operated at the capacity set by schedule. * –
If the set temp is changed, the temp will return to the registered set
temp after a preset time. *
–
Upper and lower set temperature limits have been changed. * –
Operation automatically stops in the set time zone at the set interval. * –
“Repeat off timer” is set. * –
Operation capacity of outdoor unit is controlled in the set time zone to
lower noise. *
–
The temperature sensor of the remote controller is detecting the room
temperature.
–
“Operation lock” is set.
• To unlock:
Press and on the top screen. (Press and hold for 4 seconds
or more.)
P.7
Fresh air is used for ventilation. *
(Only when connecting a heat exchange ventilation unit or connecting
a commercially sold fan)
–
Starts/stops automatically to maintain a set temperature range even
when off.
P.18
There are one or more units currently set to Direct airow. * –
There are one or more units currently set to Indirect airow. * –
There are one or more units currently set to Air circulation operation. * –
The rotation operation is set. * –
Internal cleaning is in process. P.7
Internal drying is in process. P.7
Connected with a mobile device via Bluetooth
®
functionality P.26
(alternately)
Bluetooth
®
module is considered abnormal. P.60
(alternately)
Clock not set (reset due to a power outage) P.59
* Can only be set using the “Panasonic H&C Control App”