24
(EN)
Setting information list
This provides the meanings of setting information icons.
1
Display the setting information screen.
Press
on the top screen.
(Press and hold for 4 seconds or more.)
2
Select the icon.
Press
→ .
• Only icons currently being displayed on the screen
are displayed here.
3
Check the meaning of the icon.
Conrm, then press
→ .
(Press to nish.)
• Scroll through the screen with .
Setting information icon list
Icon Description Page
The indoor unit is stopped or slight blow operation is in process. –
The indoor unit is turned on after a problem such as a power failure is
resolved.
–
The indoor unit is in defrosting operation. –
Air flow direction is locked on some units. * –
Switching between Heat and Cool/Dry mode is prohibited (Switching to
Auto mode is also prohibited.).
–
Remote control operation is restricted by a central control device. P.7
The indoor unit lter needs to be cleaned. P.17
Time to replace engine oil in the outdoor unit. Replace the oil. (Only
when the gas heat pump air conditioner is used.)
–
“ON/OFF timer” is set. * –
Separate timers are set for each day. * –
To Next Page
Loading...
