32
(EN)
Bluetooth® settingsBluetooth
®
settings
3
Conrm the numbers on the
mobile device match the 6 digits
on the remote controller.
• If the numbers do not match, check the
remote controller you want to connect
again. (Step 2)
4
Start connecting.
Mobile device
Tap “Pair”.
Remote controller
Press .
Tap
5
Conrm that the Bluetooth
®
connection is completed.
• “ ” is displayed on the top screen
when the Bluetooth
®
connection is
established. Once this step is complete,
subsequent connections will be made
automatically.
When the Bluetooth
®
connection is complete, the mobile device information is stored,
and the above Steps 3 and 4 are unnecessary from next time. Refer to page 33 to
delete the stored mobile device information.
To Next Page
Loading...
