Panasonic CZ-RTC6BLW

62
(EN)
Wireless LAN settings
Network status
At rst, set Wireless LAN functionality to [Enable]. (P.61)
1
Display the menu screen.
 When stopped
Press .
 When operating
Press repeatedly until the menu screen is
displayed.
• To return to the top screen, press .
2
Select [WLAN].
Press
→ .
3
Select [Network status].
Press
→ .
4
Check the status of the connection to the
wireless LAN network.
Conrm, then press
.
(Press 3 times to nish.)
• Not connected to router
• Connecting to router
• Operating in Auto mode
• Operating in Manual mode
• Connected to router:
“ ” is displayed on the top screen.
An icon is displayed to indicate the strength of the
wireless LAN signal (table shown on the right).
Icon Signal strength
Strong
Moderate
Weak
No signal