Panasonic CZ-RTC6WBL

23
(EN)
Contact address/Display mode
Steps 1 and 2 are common operations for each item.
1
Display the menu screen.
 When stopped
Press .
 When operating
Press repeatedly until the menu screen is
displayed.
• To return to the top screen, press .
2
Select the item to set.
Press
→ .
Contact address
The contact address can be set only with the “Panasonic H&C Control App”.
3
Conrm the name and the contact number.
Conrm, then press
.
(Press twice to nish.)
• If you need to contact for servicing, check the
back cover of the operating instructions for indoor
units or outdoor units.
Display mode
3
Select the display mode for the top screen.
Press
→ → .
(Press to nish.)
• Detailed:
The number of icons is not limited.
During operation, the current operation mode, fan
speed, and ap are displayed on the top screen.
(Refer to Step 2 in “Basic operations” (P.8))
• Standard:
The number of icons is not limited.
• Simple:
Limits the number of icons displayed on the top
screen to simplify the display.
Detailed
Standard
Simple