Panasonic CZ-RTC6WBLW - Page 65

65
(EN)
Wireless LAN settings
3
Make the settings for network
connection.
1. After conrming that the
Wireless LAN functionality on
the remote controller is set to
[Enable] (P.61), tap “Next”.
 Remote controller
Follow the instructions on the app
screen.
 Mobile device
Tap “Next”.
2. Select the option that matches
the status displayed on the
remote controller screen.
 Remote controller
Follow the instructions on the app
screen.
 Mobile device
Tap to select the option.
• If you tapped “Not connected to
router”, go to Step 4.
• If you tapped “Connected to router”,
go to Step 6.
Note
• If the router supports the WPS
mode, you can connect to the
network with Auto mode. If you
tapped “Click here to connect
without entering a password.”,
go to Step 5.