Panasonic DC-S1P

2
Colour
Black Type
DC-S1M series: Interchangeable Lens (S-R24105) is bundled.
TABLE OF CONTENTS
PAGE PAGE
1 Safety Precautions -----------------------------------------------3
1.1. General Guidelines ----------------------------------------3
1.2. Leakage Current Cold Check ---------------------------3
1.3. Leakage Current Hot Check (See Figure. 1) --------3
2Warning--------------------------------------------------------------4
2.1. Prevention of Electrostatic Discharge (ESD)
to Electrostatically Sensitive (ES) Devices ----------4
2.2. How to Recycle the Lithium Ion Battery (U.S.
Only)-----------------------------------------------------------4
2.3. How to Replace the Lithium Battery-------------------5
2.4. Caution for AC Cord (For E/GA/GC/GH)-------------6
3 Service Navigation------------------------------------------------7
3.1. Introduction --------------------------------------------------7
3.2. About service of bundled lenses -----------------------7
3.3. Important Notice --------------------------------------------7
3.4. Service Notes -----------------------------------------------9
3.5. General Description About Lead Free Solder
(PbF) -------------------------------------------------------- 10
3.6. How to Define the Model Suffix (NTSC or PAL
Model)------------------------------------------------------- 11
4 Specifications ---------------------------------------------------- 16
4.1. Camera Body---------------------------------------------- 16
5 Location of Controls and Components------------------ 23
5.1. Camera Body---------------------------------------------- 23
6 Service Mode ----------------------------------------------------- 27
6.1. Error Code Memory Function ------------------------- 27
7 Troubleshooting Guide---------------------------------------- 31
7.1. Checking Method of Body and
Interchangeable Lens ----------------------------------- 31
7.2. Wi-Fi Circuit (WIFI BT P.C.B.)------------------------- 34
8 Service Fixture & Tools --------------------------------------- 35
8.1. Service Fixture and Tools ------------------------------ 35
8.2. Clean Box -------------------------------------------------- 37
8.3. When Replacing the Main P.C.B. -------------------- 37
8.4. Service Position ------------------------------------------ 38
9 Disassembly and Assembly Instructions --------------- 39
9.1. Disassembly Flow Chart-------------------------------- 39
9.2. P.C.B. Location ------------------------------------------- 40
9.3. Disassembly Procedure -------------------------------- 41
10 Measurements and Adjustments -------------------------- 60
10.1. Matrix Chart for Replaced Part and Necessary
Adjustment------------------------------------------------- 60
11 Maintenance ------------------------------------------------------ 63
11.1. Notice in External Cleaning---------------------------- 63
12 Block Diagram --------------------------------------------------- 64
12.1. Overall Block Diagram ---------------------------------- 64
13 Wiring Connection Diagram -------------------------------- 65
13.1. Interconnection Diagram------------------------------- 65
14 Schematic Diagram -------------------------------------------- 66
15 Printed Circuit Board------------------------------------------ 66
16 Exploded View and Replacement Parts List----------- 66