EasyManua.ls Logo

Panasonic DC66C10RCU6 - User Manual

Panasonic DC66C10RCU6
2 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
Refrigerant Control . . Capillary Tube
Evaporator
Temp. Range . . . . . . . -31°F to 23°F / -35°C to -5°C
Rated Performance Data*
Cond. Temp I* Cond. Temp II*
Capacity . . . . . . . . . . . . . . 813 Btu/h ±7% 895 Btu/h ±7%
E.E.R. . . . . . . . . . . . . . . . . . 5.53 Btu/Wh ±7% 6.44 Btu/Wh ±7%
Current . . . . . . . . . . . . . . . 1.28 Amps 1.21 Amps
Nominal Motor Data
Motor Input . . . . . . . . . . . . . . .147 Watts 139 Watts
Rated Current . . . . . . . . . . . . 1.30 Amps
Type . . . . . . . . . . . . . . . . . . . . RSCR, PTC relay
Locked Rotor . . . . . . . . . . 10.4 Amps
Start Current . . . . . . . . . . 18.1 Amps
Coil Resistances Run . . . .3.99 Ohms
@ 68°F (20°C) Start . . . 4.28 Ohms
*Test Conditions for Performance Specifications
Test Oil . . . . . . . . . . . . . . . . ISO VG 10
Shell Temp . . . . . . . . . . . . . . 150.0°F / 65.0°C
Condensing Temp . . . . . . . . . (I) 130.0°F / 54.4°C
. . . . . . . . . (II) 105.0°F / 40.6°C
Evaporating Temp . . . . . . . . . -10.0°F / -23.3°C
Ambient Temp . . . . . . . . . . . . 90.0°F / 32.2°C
Gas Superheat . . . . . . . . . . . 90.0°F / 32.2°C
Liquid Sub-Cooling . . . . . . . . 90.0°F / 32.2°C
Electrical Accessories
Overload Protector
Nominal Operating Characteristics
Model Name 4TM757NFBYY
Manufacturer Texas Instruments
Temperature To . . . . . . . . . . . Open: 248°F ± 9°F / 120°C ± 5°C
Close: 142°F ± 16°F / 61°C ± 9°C
Trip Current. . . . . . . . . . . . . . @158°F (70°C) 3.60 Amps ± 7.5%
@77°F (25°C) 10.0 Amps @ 16 sec. max.
P.T.C. Starting Device
Nominal Operating Characteristics
Model Name PTH7M6R8 PTH490D-AS6R8
Manufacturer Murata Mfg. Murata Mfg.
Base resistance
@ 77°F(25°C) ±20% 6.8 6.8 Ohms
Power Consumption (max) 2.9 3.5 Watts
Operation time 0.6 to 1.8 1.0 to 2.7 seconds
Recovery time (max) 60 65 seconds
Run Capacitor 15 µF 180 V (min.)
†Although these accessories are listed by UL/CSA for use with this compressor,
Matsushita assumes no responsibility whatsoever for these or any other components
sourced by the refrigeration system manufacturer from third parties.
Panasonic Industrial Company
Refrigeration Products Department
Tel: 201 - 392 - 4249
Fax: 201 - 392 - 4315 Rev#1-5/9
Evaporating Temp.
Condensing Temp. Rating -30°F -10°F +10°F
130°F Btu/h 376 813 1,458
Watts 94 147 208
Amps 0.82 1.28 1.80
E.E.R. 4.00 5.53 7.01
120°F Btu/h 423 850 1,502
Watts 98 145 201
Amps 0.85 1.26 1.74
E.E.R. 4.32 5.86 7.47
110°F Btu/h 451 881 1,523
Watts 99 142 191
Amps 0.86 1.24 1.65
E.E.R. 4.55 6.20 7.97
MATSUSHITA Compressor Single Phase 115V
Model# DC66C10RBU6 R-134a 60
Hz
Performance Curves
Voltage Range . . . . . . . . . 103 Volts to 127 Volts @ 60 Hz
Application . . . . . . . . . . . . Low Back Pressure
Compressor Cooling . . . . Fan/Static Cooling
9 – Point Data
Panasonic
®
60
100
140
180
220
260
-40 -30 -20 -10 0 10 20
Input Power (W)
0.6
1.0
1.4
1.8
2.2
-40 -30 -20 -10 0 10 20
Current (A)
200
400
600
800
1,000
1,200
1,400
1,600
1,800
2,000
-40 -30 -20 -10 0 10 20
Evaporating Temperature (°F)
Capacity (BTU/H)
110°F 120°F 130°F
Question and Answer IconNeed help?

Do you have a question about the Panasonic DC66C10RCU6 and is the answer not in the manual?

Panasonic DC66C10RCU6 Specifications

General IconGeneral
BrandPanasonic
ModelDC66C10RCU6
CategoryAir Compressor
LanguageEnglish

Summary

Rated Performance Data

Capacity and Efficiency

Details on compressor capacity and E.E.R. ratings under specific conditions.

Motor and Electrical Data

Information on motor input, current, locked rotor, and coil resistances.

Test Conditions for Performance Specifications

Operating Parameters

Specifies test conditions including oil type, shell temp, condensing/evaporating temps, and superheat.

Electrical Accessories

Overload Protector Details

Information on the overload protector's model, manufacturer, and trip characteristics.

P.T.C. Starting Device

Nominal Operating Characteristics

Operating characteristics for the P.T.C. starting device, including resistance and timing.

Run Capacitor Specification

Details the capacitance and voltage rating required for the run capacitor.

9-Point Data Table

Compressor Dimensions

Electrical Schematic

Tube Specifications

General Data and Approved Oils

Oil Charge and Weight

Information on oil charge volume and net weight with oil.

Approved Lubricants

Lists approved oil types and brands for the compressor.

Moisture and Impurity Limits

Specifies maximum allowable residual moisture and impurities.

Related product manuals