Convenient functions
VQT4C72
72
Changing the unit’s settings
Picture
Still Mode
Select the type of picture shown when you pause
play.
• Field:
Select if jittering occurs when “Automatic” is
selected. (The picture is coarser.)
•Frame:
Select if small text or fine patterns cannot be
seen clearly when “Automatic” is selected.
(The picture is clearer and finer.)
Seamless Play
The segments can be played back seamlessly.
• When “Off” is selected, frame-dropping
between the segments can be avoided, but the
video may freeze for a moment between the
segments.
• Seamless Play function does not work
depending on the condition or the kind of
programme.
NTSC Video Output
(This works only for video output from the VIDEO
OUT terminal.)
Select how to output the NTSC image.
Sound
Dynamic Range Compression
To lower the dynamic range for playback (e.g., at
night).
• This does not work depending on broadcasts
and recorded titles.
Downmix
Select the downmix system of multi-channel to 2-
channels sound.
• Select “Surround encoded”, when the
connected equipment supports the virtual
surround function.
• There is no effect on “Bitstream” via HDMI AV
OUT and DIGITAL AUDIO OUT terminal.
• The audio will be output in “Stereo” in the
following cases.
- AVCHD playback
Bilingual Audio Selection
Select whether to record the audio type (“M1” or
“M2”) when:
- DR File Conversion (> 38)
- Copying to a DVD-R, DVD-RW, +R and +RW.
- “Rec for High Speed Copy” is enabled. (> 71)
- Recording sound in LPCM (> 73, Audio Type
for XP Recording).
DMRXW390GZ-VQT4C72_eng.book 72 ページ ２０１２年２月２８日 火曜日 午前９時８分
To Next Page
Loading...
Need help?
General
