To Next PageTo Next PageWhy is my Panasonic Digital System battery life so short?
Short battery life can be due to the network you're using or the condition of your battery pack. To maximize performance, use the telephone until the low battery warning appears, then fully recharge it. To revive the battery pack, use the telephone until it switches off, then fully recharge it three times. Note that the battery pack will eventually wear out and need replacement.
What to do if calls cannot be made on Panasonic Digital System Cordless Telephone?
If you cannot make calls, it may be because outgoing calls are barred or the telephone is not registered to a network. Move to an area with coverage and operate your telephone after it has registered with a network. Try turning the power off and on again.
What to do if calls cannot be received on Panasonic Cordless Telephone?
If you cannot receive calls, it may be because incoming calls are barred or the telephone is not switched on. Try turning the power off and on again.
How to fix Panasonic Digital System Cordless Telephone that will not switch on?
Check that the battery pack is fully charged and correctly connected to the telephone.
What to do if calls cannot be made from Fixed Dial Memory on Panasonic Digital System Cordless Telephone?
Check that the telephone number is stored in Fixed Dial Memory.
General| Type | Digital Cordless Telephone System |
|---|---|
| Technology | DECT 6.0 |
| Frequency | 1.9 GHz |
| Standby Time | Up to 5 days |
| Caller ID | Yes |
| Call Waiting | Yes |
| Speakerphone | Yes |
| Intercom | Yes |
| Display | LCD |
| Backlit Keypad | Yes |
| Expandable | Up to 6 handsets |
| Power Source | AC adapter |
Explains the Panasonic modern technology DECT system.
Provides safety guidelines and important notices for installation and use.
Step-by-step guide to install the battery pack into the PS.
Instructions on how to charge the Personal Station (PS).
Procedures for turning the PS power on and off.
How to adjust the volume of the ringing tone in four stages.
How to adjust conversation volume in three stages.
Guide to programming different ring patterns for incoming calls.
Identifies and describes the buttons and features of the PS handset.
Explains the various icons and indicators on the PS display.
Instructions for making calls using an external telephone line.
Steps for making calls to internal extensions.
How to answer incoming calls on the PS.
Procedure for putting a call on hold.
Storing, checking, changing, and deleting speed dial numbers.
How to redial the last number or select from recent calls.
Using the RECALL key to access PBX dial tone.
How to switch signalling from pulse to tone.
Configuring the PS to answer calls by pressing any key.
How to check the battery charge level.
Explains error indications and their meanings.
Process for storing IDs and registering the PS to the RE.
How to display the PS-ID (IPUI-N) for registration.
Guidelines for cleaning and maintaining the equipment.
Lists common problems and their solutions.
