To play back the final few seconds of the last recorded scene in the Recording Pause
Mode.
Press the EDIT SEARCH Button
briefly in the recording Pause Mode,
The [CHK] indication appears.
After checking, the Movie Camera returns
to the Recording Pause Mode.
• For Recording Check, the Movie Camera
must be in the same mode (SP or LP) as
used for recording, otherwise the
playback picture is distorted.
EDIT
SEARCH<I<I
You can visually search for scenes in
CAMERA mode to maintain proper
continuity when taping.
RECORD/PAUSE
Button
POWER Switch
EDIT EDIT
SEARCH "41'4 SEARCH I1_
Set POWER Switch to CAMERA.
In RECORD/PAUSE mode, hold
down EDIT SEARCH _ to perform
a forward visual search or EDIT
SEARCH _ to perform a reverse
visual search. Releasing the button
stops the search.
Press RECORD/PAUSE to continue
recording.
Record Review:
Press EDIT SEARCH .4t<1once while in
Record/Pause mode to review the last few
seconds of your recording.
Note:
• During Edit Search, the picture will
become mosaic in both search, the sound
will be muted in reverse visual search.
• Make sure the SP/LP tape speed setting
is the same as the recording to eliminate
distortion during edit search.
For assistance, call 1-800-211-PANA(7262) 29
To Next Page
Loading...
