• t,[oIo]_ LVJ_ ,_,-"__,l i[,,]t•
You can go directly to a blank portion of tape and start recording exactly where you left off.
MENU Button Set the POWER Switch to VCR.
Press MENU Button to display the
menu screen. Then rotate the SELECT
SET WHEEL to select &SEARCH (see
page 19).
POWER Switch
Press the SELECT SET WHEEL to
select ON. The Palmcorder will start a
forward Book Mark Search.
You can operate the major functions of your Palmcorder from up to approximately 16 feet
(5 m) away (indoors). Aim the IR Remote Control toward the front of the Palmcorder and
press the desired buttons (sensor is located under the lens).
To operate Camera functions:
Set the POWER Switch to CAMERA.
To operate VCR functions:
Set the POWER Switch to VCR.
/ _ •
Controlled Functions
RedPause (see page 27)
Tele (Zoom) (see page 39)
Wide (Zoom) (see page 39)
Date/Time (see page 21)
Reset (see page 48)
Photo Shot (see page 40)
Display On TV(see page 37)
Counter/Time Code (see pages 20, 48)
Audio Dubbing (see page 47)
Record (see page 50)
Menu (see page 16)
Play (see page 32)
FF/Search (see page 33)
REW/Search (see page 33)
Pause/Select (see pages 16, 33)
Stop/Set (see pages 16, 32)
Slow/Frame Advance (Forward) (see pages 33. 35)
Slow/Frame Advance (Backward) (see pages 33. 35)
Index Search (Forward) (see page 35)
Index Search (Backward) (see page 35)
Speaker Volume (see page 32)
30 For assistance, call 1-800-211-PANA(7262)
To Next Page
Loading...
