Your Palmcorder may be connected to a
TV to play back tapes or to view what you
are recording by connecting to the Jack
Box.
Before you begin...
• Connect the Palmcorderto your TV as
illustrated on next page,
IMPORTANT:
Turn off the Palmcorder before power
connecting to a power source.
,\
Slide the Viewfinder backward to its
fully extended position and then tilt
it upward.
Insert the Jack Box and slide it down
until it locks with a click.
Note:
• Use an AC Adaptor PV-DAC9 (included)
so that you do not have to worry about
depleting the battery.
• Connect earphones (not supplied) to the
PHONES jack.
PHONES
Jack
36 For assistance, call 1-800-211-PANA(7262)
To Next Page
Loading...
